Subject: Re: So close I can taste it: mol-0.9.40 on 603 machine
From: Todd R. Rossman (todd@alkhemy.com)
Date: Fri Feb 11 2000 - 10:42:41 MST
Ok, I'm getting excited reading this too - I would like to duplicate or
test whatever you all come up with! I have mol-0.9.40 and kernel 2.2.12 -
where did you get the 2.2.14 kernel from please? I'd like to be on the same
score sheet as you two gentlemen!
I'll try to retrace the steps you two made...
Todd Rossman
todd@alkhemy.com
rossmant@msu.edu
>Alright . . progress. I'm at work now but I'll be hacking away
>tonight. I'll see if I can make any more progress too. You're right .
>. we're so close we can taste it . . I'm going to play around with
>console vs. xwindow and see what I can come up with
>
>I'll write with my successes or failures
>
>Keith Clayton
>kclayton@jps.net
>
>Ed Jaeger wrote:
> >
> > I recompiled the kernel, turning off module versions, rather than adding
> > the module version to the mol code.
> >
> > OH MY GOD IT ALMOST WORKS!
> >
> > See the following:
> >
> > Script started on Fri Feb 11 08:25:38 2000
> > [ed_j@laura ed_j]$ startmol
> > Using MOL library directory /usr/lib/mol
> > Trying to load the Mac-on-Linux kernel module.
> >
> > The Mac-on-Linux kernel module is not loaded. Please run 'startmol' as root
> > [ed_j@laura ed_j]$ su -
> > Password:
> > [root@laura /root]# startmol
> > Using MOL library directory /usr/lib/mol
> > Trying to load the Mac-on-Linux kernel module.
> >
> > Removing stale lockfile /var/lock/mol
> > Mac-on-Linux 0.9.40
> > (C) 1997-2000 Samuel Rydh, <samuel@ibrium.se>
> > Using resource file '/etc/molrc'
> > MOL kernel module 1.1.40
> > Loading OF device tree from 'oftrees/oftree.powerbase.200'
> > 64MB RAM mapped at 0x20000000
> > 4096K ROM mapped at 0x4fc00000 from 'rom/rom.pb200'
> > ROM checksum = 0xf9
> > Running in PowerPC 604 mode
> > DEC frequency: 0x00989680 (10 MHx), 1000:100 mticks/usec
> > PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000
> > OHare, (0:16) found
> > Using nvram-image 'nvram/nvram.8500.image'
> > Swim3 floppy driver installed
> > xvideo: Could not connect to X server
> > Video module 'xvideo' not installed.
> > Running on VT 8.
> > Using adb mouse on /dev/adbmouse
> > Video module 'console_video' installed.
> > MODE: 640*480, depth 8,15,32, 59.9 Hz
> > MODE: 640*480, depth 8,15,32, 72.1 Hz
> > MODE: 640*480, depth 8,15,32, 74.9 Hz
> > MODE: 640*480, depth 8,15,32, 89.9 Hz
> > MODE: 640*480, depth 8,15,32, 99.7 Hz
> > MODE: 800*600, depth 8,15,32, 56.2 Hz
> > MODE: 800*600, depth 8,15,32, 60.3 Hz
> > MODE: 800*600, depth 8,15,32, 70.0 Hz
> > MODE: 800*600, depth 8,15,32, 72.1 Hz
> > MODE: 800*600, depth 8,15,32, 74.9 Hz
> > MODE: 800*600, depth 8,15,32, 89.9 Hz
> > MODE: 800*600, depth 8,15,32, 99.9 Hz
> > MODE: 1024*768, depth 8,15, 60.0 Hz
> > MODE: 1024*768, depth 8,15, 70.0 Hz
> > MODE: 1024*768, depth 8,15, 75.0 Hz
> > MODE: 1152*864, depth 8,15, 59.9 Hz
> > MODE: 1280*1024, depth 8, 60.0 Hz
> > No video mode match the default one.
> > Starting in video mode 640*480, depth 8, 59.9 Hz [offs:0, rb:640]
> > Autoswitching to console
> > osi_enet: Attached to network interface <eth0>
> > osi_enet: Ethernet address is: 00 00 c5 53 55 ce
> > osi_scsi: *** OSI SCSI DISABLED **
> > MESH SCSI-driver installed (IRQs 12/12)
> >
> > HFS disk: 1995 MB, /dev/hda5 [read-only]
> >
> > SCSI-Disk (hw-0): 0 MB
> >
> > Starting emulation...
> >
> > --- At this ppoint it switches to VT8, which is blank.
> > --- After a few minutes I switch back to VT7 & ^C
> >
> > Signal INT
> > One more to kill emulator
> > cleaning up...
> > Terminating threads...
> > thread 'SWIM-thread' is active!
> > DONE
> >
> > [root@laura /root]#
> > [root@laura /root]# logout
> >
> > --- Back as regular user, I set the DISPLAY variable & try again....
> >
> > [ed_j@laura ed_j]$ export DISPLAY=laura:0.0
> > [ed_j@laura ed_j]$ startmol
> > Using MOL library directory /usr/lib/mol
> > Mac-on-Linux 0.9.40
> > (C) 1997-2000 Samuel Rydh, <samuel@ibrium.se>
> > Using resource file '/etc/molrc'
> > MOL kernel module 1.1.40
> > Loading OF device tree from 'oftrees/oftree.powerbase.200'
> > 64MB RAM mapped at 0x20000000
> > 4096K ROM mapped at 0x4fc00000 from 'rom/rom.pb200'
> > ROM checksum = 0xf9
> > Running in PowerPC 604 mode
> > DEC frequency: 0x00989680 (10 MHx), 1000:100 mticks/usec
> > PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000
> > OHare, (0:16) found
> > Using nvram-image 'nvram/nvram.8500.image'
> > Swim3 floppy driver installed
> > Video module 'xvideo' installed.
> > Running on VT 8.
> > Using adb mouse on /dev/adbmouse
> > Video module 'console_video' installed.
> > MODE: 640*480, depth 8,15,32, 59.9 Hz
> > MODE: 640*480, depth 8,15,32, 72.1 Hz
> > MODE: 640*480, depth 8,15,32, 74.9 Hz
> > MODE: 640*480, depth 8,15,32, 89.9 Hz
> > MODE: 640*480, depth 8,15,32, 99.7 Hz
> > MODE: 800*600, depth 8,15,32, 56.2 Hz
> > MODE: 800*600, depth 8,15,32, 60.3 Hz
> > MODE: 800*600, depth 8,15,32, 70.0 Hz
> > MODE: 800*600, depth 8,15,32, 72.1 Hz
> > MODE: 800*600, depth 8,15,32, 74.9 Hz
> > MODE: 800*600, depth 8,15,32, 89.9 Hz
> > MODE: 800*600, depth 8,15,32, 99.9 Hz
> > MODE: 1024*768, depth 8,15, 60.0 Hz
> > MODE: 1024*768, depth 8,15, 70.0 Hz
> > MODE: 1024*768, depth 8,15, 75.0 Hz
> > MODE: 1152*864, depth 8,15, 59.9 Hz
> > MODE: 1280*1024, depth 8,15, 60.0 Hz
> > MODE: 1600*1200, depth 8,15, 0.0 Hz
> > No video mode match the default one.
> > Starting in video mode 640*480, depth 8, 59.9 Hz [offs:0, rb:640]
> > osi_enet: Attached to network interface <eth0>
> > osi_enet: Ethernet address is: 00 00 c5 53 55 ce
> > osi_scsi: *** OSI SCSI DISABLED **
> > MESH SCSI-driver installed (IRQs 12/12)
> >
> > HFS disk: 1995 MB, /dev/hda5 [read-only]
> >
> > SCSI-Disk (hw-0): 0 MB
> >
> > Starting emulation...
> >
> > --- At this point I get a 640x480 window on my 1152x870 X server.
> > --- The window is titled "Mac-on-Linux (Slow Video)"
> > --- But it remains black. After about 5 minutes I try to kill it w/^C
> >
> > /usr/bin/startmol: kill: (720) - Not owner
> > /usr/bin/startmol: kill: (720) - Not owner
> > /usr/bin/startmol: kill: (720) - Not owner
> > /usr/bin/startmol: kill: (720) - Not owner
> > /usr/bin/startmol: kill: (720) - Not owner
> >
> > --- So I kill the window.....
> >
> > X connection to laura:0.0 broken (explicit kill or server shutdown).
> > cleaning up...
> > WARNING: redraw_thread_not idle
> > [ed_j@laura ed_j]$ exit
> >
> > Script done on Fri Feb 11 08:29:59 2000
> >
> > So now I need to figure out why it won't boot MacOS.Im using MacOS
> > 8.1, with a ROM grabbed from the machine I'm running in. I've tried
> > processor types 3, 4 and 8. My MacOS boot volume is /dev/hda5, which is
> > set in /etc/molrc. I'm back in MacOS for the day, so more research will
> > have to wait....
> >
> > Keith Clayton wrote:
> > >
> > > It appears that setting module versions is the problem. If I append the
> > > version number to mol_interface symbol (mol_interface_Rb923c717 for
> me) in
> > > the get_module_symbols call in init.c then the code does return a pointer
> > > to the molif struct. It also gets significantly further before failing
> > > with unresolved symbols for Hash, Hash_mark, handle_mm_fault
> > > next_mmu_context and last_task_used_math.
> > --
> > Ed Jaeger, CFO, Bohlender Graebener Corporation
> > ed.jaeger@bgcorp.com
> > http://www.bgcorp.com
> > ---
> > "A man never discloses his own character so clearly as when he
> describes another's."
> >
> > -- Jean Paul Richter (1763-1825)
> >
> > ** Sent via the linuxppc-user mail list. See http://lists.linuxppc.org/
This archive was generated by hypermail 2a24 : Wed Mar 01 2000 - 00:06:20 MST