Subject: ethernet problems
From: Jan Sievers (jan.sievers@post.rwth-aachen.de)
Date: Thu Jun 15 2000 - 17:25:49 MDT
Hi all,
on my 4400/200 running LinuxPPC2000, kernel 2.2.15pre19, I don't seem to
get my ethernet card to work under MOL 0.9.48. If I disable osi_enet it
starts up fine, if I enable it crashes at the very end of the Mac OS 8.6
boot process.
My DEC Tulip NIC seems to be recognized,though.
Any hints greatly appreciated.
Jan
Here's my /etc/molrc, startmol and dmesg|grep eth output:
[jan@iff448 init.d]$ startmol
Mac-on-Linux (C) 1997-2000 Samuel Rydh <samuel@ibrium.se>
Uses binaries and modules in /usr/lib/mol
Version 0.9.48
Using resource file '/etc/molrc'
Using MOL library directory '/usr/lib/mol'
MOL kernel module 1.1.48
sym: Hash [6] C019C0F0
sym: Hash_mask [7] C019C11C
sym: last_task_used_math [3] C0170AE8
sym: next_mmu_context [4] C019C114
sym: handle_mm_fault [5] C0021AA8
Loading OF device tree from 'oftrees/oftree.nw'
48MB RAM mapped at 0x20000000
Running in PowerPC 750 mode (G3)
DEC frequency: 0x00989680 (10 MHx), 1000:100 mticks/usec
PCI-bridge 'pci' (bus 0..1) installed at 0x80000000
PCI-bridge DEC,21154 at 0:13
Heathrow, (1:05) found
Using nvram-image 'nvram/nvram.nw'
osi_driver: Using IRQ 0x17
osi_driver: Adding pci card at (0:10)
xvideo: X display is Intel byte ordered. Your colours will be funny
unless you s
witch your Mac into 8 bit colour
Using backing store for X-window
Video module 'xvideo' installed.
Running on VT 7.
Using adb mouse on /dev/adbmouse
Video module 'console_video' installed.
Video module 'vnc' not installed.
MODE: 640*480, depth 8,15, 0.0 Hz
MODE: 800*600, depth 8,15, 0.0 Hz
MODE: 832*624, depth 15, 172.7 Hz
MODE: 1024*768, depth 8,15, 0.0 Hz
MODE: 1152*864, depth 8,15, 0.0 Hz
MODE: 1280*1024, depth 8,15, 0.0 Hz
MODE: 1600*1200, depth 8,15, 0.0 Hz
Starting in video mode 832*624, depth 15, 172.7 Hz [offs:2176, rb:1664]
osi_enet: Attached to network interface <eth0>
osi_enet: MOL Ethernet address is: 02 a0 40 7e bf f4
osi_scsi: *** OSI SCSI DISABLED **
----> (disk_open) Opening /dev/cdrom: No medium found
HFS disk: 1515 MB, /dev/hda6 [read-write]
HFS disk: 0 MB, images/moldisk.im [read-only]
osi_sound driver opened
Sound syncvalue: 400
----> Failed to open /dev/dsp - Sound Disabled
Mapping GC at 80800000
Starting emulation...
RTAS instantiated at 00004000
************ WARNING, phandle == 0 ***********
********* of_quiesce *********
<*> kOpenCommand
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
Write of mouse control register (63 04)
<*> control - Unrecognized cscode 20
**** end startmol output ******
***************** file: /etc/molrc ****************
newworld_boot: yes
newworld_rom: rom/rom.nw # path to the stripped ROM-image
rom_image: rom/rom.8500
oftree: oftrees/oftree.8500
processor: 8 # Should almost *ALWAYS* be 8
<------------
ram_size: 48 # You might want to increase this
blkdev: /dev/hda6 -rw
blkdev: /dev/cdrom -cd
mouse_device: /dev/adbmouse
mouse_protocol: adb # usb (ps2), adb,
console
mouse_dpi: 140 # higher == slower mouse
use_x_cursor: yes # use X cursor as mouse cursor
disable_osi_enet: no
enet_interface: eth0
unique_mol_ethernet: yes
resolution: 832/624/75 # 640/480/75 #
width/height[/Hz]
depth: 16 #
vmode_database: /etc/fb.modes
start_on_console: no # switch to console initially
autoswitch_console: no # allow automatic switch to console
enable_console_video: yes # 'no' to disable full-screen (console)
video
enable_xvideo: yes #
use_backing_store: yes # Set to 'yes' only if the X-server is
remote.
enable_vncvideo: no # Enable the VNC server
vnc_port: 5900 # port to use for VNC
keyboard_id: 5
gamma: 1.0 # one value for all RGB
play_startboing: yes # Play startboing
disable_osi_sound: no # Disable sound?
sound_sync_value: 400 # USE THE LOWEST POSSIBLE VALUE
logfile: /tmp/mol-logfile # only used in debugger
mode
This is what dmesg says about my NIC:
eth0: Digital DC21041 Tulip rev 33 at 0x400, 00:A0:40:7E:BF:F4, IRQ 25.
eth0: 21041 Media table, default media ffff (Autosense).
eth0: 21041 media #0, 10baseT.
eth0: 21041 media #1, 10base2.
eth0: 21041 media #2, AUI.
This archive was generated by hypermail 2a24 : Thu Jun 15 2000 - 16:32:51 MDT