Subject: Re: New to this list, Pismo-user
From: Charles McLachlan (cim@uk.research.att.com)
Date: Tue May 09 2000 - 06:22:50 MDT
> How do I run mol on my Pismo?
> It starts up in a vt or in a x-window, but I never get any further than
> that.
> The load of cpu becomes 100% and the MacOS does not boot.
It's a bit difficult basing an answer on so little information but I'll give it
a go.
Working from the basic assumption of sensibleness (i.e. you've RTFMs in the Doc
directory and have set up your molrc and roms correctly):
Edit molrc so that you're not including anything fancy (like networking, scsi,
real harddisks, etc.)
make sure your only block dev is
blkdev: /dev/cdrom -ro
Put your install cd in the drive and then startmol
This should at least boot, so you can gradually add other things one by one.
This is the way I first booted Mol, but YMMV
-- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Charlie McLachlan AT&T Research Lab. Cambridge. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This archive was generated by hypermail 2a24 : Tue May 09 2000 - 06:37:09 MDT