Re: help with mol

Subject: Re: help with mol
From: Brice Ruth (brice@webprojkt.com)
Date: Tue Mar 06 2001 - 08:13:35 MST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: Matthew J. Reda: "Problem with Bitkeeper tree"
• Previous message: Terry Lynch: "help with mol"
• In reply to: Terry Lynch: "help with mol"
• Reply: Brice Ruth: "Re: help with mol"

Terry,

Here's your problem:

Starting in video mode 640*480, depth 8, 0.0 Hz [offs:0, rb:640]

0.0 Hz indicates that mol found no video mode to use - have you run
molvconfig successfully?

-Brice

Terry Lynch wrote:
>
> Hello,
>
> Mol didn1t start when I typed startmol. The last line before it stopped was
> "Mapping GC at F3000000." Does anyone see any obvious reasons why it's
> not working? I am stumped.
>
> The log:
>
> [root@eSpeed /root]# startmol
> Mac-on-Linux 0.9.54, (C) 1997-2000 Samuel Rydh <samuel@ibrium.se>
> Removing stale lockfile /var/lock/mol
>
> Version 0.9.54
> MOL kernel module 1.1.54
> Resource file: /etc/molrc
> Library directory: /usr/lib/mol
> Using Linux keycodes
> OF device tree: oftrees/oftree.7200
> 64MB RAM mapped at 0x20000000
> 4096K ROM mapped at 0x4fc00000 from 'rom/ROM-7200'
> ROM checksum = 0x129
> Running in PowerPC 750 mode (G3)
> DEC frequency: 24 MHz, 249:10 mticks/usec
> Using nvram-image 'nvram/nvram.ow'
> Video module 'xvideo' installed.
>
> MODE: 640* 480, depth 8 { 0.0 } Hz
> MODE: 800* 600, depth 8 { 0.0 } Hz
> MODE: 1024* 768, depth 8 { 0.0 } Hz
> MODE: 1152* 864, depth 8 { 0.0 } Hz
> MODE: 1280*1024, depth 8 { 0.0 } Hz
> MODE: 1600*1200, depth 8 { 0.0 } Hz
>
> No video mode match the default one.
> Starting in video mode 640*480, depth 8, 0.0 Hz [offs:0, rb:640]
> Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
> 53c94 SCSI-driver installed (IRQs 12/0)
>
> HFS disk: 700 MB, /dev/hda10 [read-only]
> ----> (disk_open) Opening /dev/cdrom: No such device
> HFS disk: 17508 MB, /dev/hda9 [read-only]
> HFS disk: 0 MB, images/moldisk.im [read-only]
>
> SCSI-Disk (hw-0): 0 MB
>
> Swim3 floppy driver installed
> Starting emulation...
>
> Mapping GC at F3000000
> dcbi treated as no-op
> Unmapping GC
> Mapping GC at F3000000
>
> -----
> A warm thank you,
> Terry

-- 
Brice Ruth
WebProjkt, Inc.
VP, Director of Internet Technology
http://www.webprojkt.com/

• Next message: Matthew J. Reda: "Problem with Bitkeeper tree"
• Previous message: Terry Lynch: "help with mol"
• In reply to: Terry Lynch: "help with mol"
• Reply: Brice Ruth: "Re: help with mol"

This archive was generated by hypermail 2a24 : Tue Mar 06 2001 - 09:04:02 MST