Subject: Re: can't compile mol-0.9.58-1
From: John M. Wright (jmw@chem.ucsd.edu)
Date: Fri May 18 2001 - 11:59:45 MDT
Samuel,
Many thanks for the prompt reply! I downloaded and installed
binutils-2.10.1.0.4-1, and now mol-9.58 compiles and appears to
run with no problems.
By the way, I see that there is now a mol-9.59 and mol-kmods-9.59
on the mol ftp archive; are these experimental "bleeding edge",
or ready for prime time?
Thanks again,
John Wright
> Date: Fri, 18 May 2001 12:26:06 +0200
> From: Samuel Rydh <samuel@waltari.theophys.kth.se>
> To: mol-general@lists.maconlinux.org
> Cc: "John M. Wright" <jmw@chem.ucsd.edu>
> Subject: Re: can't compile mol-0.9.58-1
>
> >I decided to compile mol-9.58
> >against my kernel 2.2.19 source, and discovered that the compile
> >stops with the following error messages:
> >
> >cpp -D__ASSEMBLY__ -I../include -I/MacHD6/src/rpm/BUILD/mol-0.9.58/
> >sinclude mainloop_asm.S | as -o obj/mainloop_asm.o
> >**************** DEBUG ENABLED IN mainloop_asm.S ***************
> mainloop_asm.S: Assembler messages:
> >mainloop_asm.S:363: Error: alignment padding (1 bytes) not a multiple of 4
> >mainloop_asm.S:363: Error: alignment padding (3 bytes) not a multiple of 4
>
> If you upgrade your the binutils package, the error will go away.
>
> Regards,
>
> /Samuel
>
>
This archive was generated by hypermail 2a24 : Fri May 18 2001 - 11:04:22 MDT