Still can't start on my Titanium

[Hugh Caley]

I just downloaded, built and installed the cvs version of mol, and I'm 
still getting the same error I was getting with the RPM.  I've tried it 
with Altivec on and off.  It did the same with the stock YDL 2.2 kernel, 
and also with a new one I built from BenH's tree, 2.4.19-pre5-ben0.

Did someone have luck with copying the ROM over?

Hugh

Copyright (C) 1997-2001 Samuel Rydh <samuel@ibrium.se>
Version 0.9.61
Configuration file: /etc/molrc
Library directory: /usr/lib/mol
Session 0. Lockfile '/var/lock/mol-0'
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 24.96 MHz
256MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Using Linux keycodes
Using nvram-image 'nvram/nvram.nw'
Video module 'xvideo' installed.
Running on VT 8.
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15   { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32   { 54.7 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

Starting in video mode 1152*768, depth 15, 54.7 Hz  [offs:0, rb:2304]
Ethernet Interface (port 1) 'sheep-<eth1>' @ FE:FD:DE:AD:BE:EF

HFS  images/moldisk.i MOL                <read-only>     0 MB
HFS+ /dev/hda9        Booty              <read-write> 15031 MB

***** SIGNAL 11 [Segmentation fault] in thread main-thread *****
   si_signo = 11, si_errno 0, si_code 00030001
   si_addr 0x2a. Last RVEC: 0x0 (0)
   NIP 10038338
cleaning up...
Terminating threads...
DONE