no-show in chooser, OldWorld Mac/YDL

[Ken Grunke]

Newbie trying to setup appletalk network between MOL and YDL on an OldWorld 
Powermac 7500/200. Seems like a simple thing to do, but the Linux side 
doesn't show up in the chooser. 
I turn on netatalk, then start MOL and Appletalk is on.
When I click on Appleshare, nothing happens even after waiting about 10 
minutes.
I had previously edited /etc/stsconfig/network at the advice of a HOWTO by 
Kai Staats so I could get ppp working--changing "GATEWAYDEV=eth0" to 
"GATEWAYDEV=ppp0". Just tried reverting back to "eth0" for the heck of 
it--but it didn't help, and ppp is now messed up.
	
In my /etc/molrc file, I have enabled:

netdev:			eth0 -sheep

as the only network device. Is this correct?

I suppose I should upgrade to MOL (0.9.64?), and my kernel too--currently at 
0.9.60/2.4.18-0.8a.
But I'm new to this, and don't want to mess anything up! If I can just get 
local networking between OS 8.6 and YDL, I'll be very happy for now--then 
I'll attack more advanced stuff, like ethernet and upgrading, later.

Thanks in advance for any tips, and here is the terminal output upon starting 
MOL, which works great otherwise:

[root@localhost token]# startmol -a
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/mol.o
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/mol.o will taint the 
kernel: no license
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/mol.o will taint the 
kernel: forced load
Loading SheepNet ethernet kernel module:
   /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/sheep_net.o
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/sheep_net.o will 
taint the kernel: no license
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.18-0.8a/sheep_net.o will 
taint the kernel: forced load
Copyright (C) 1997-2001 Samuel Rydh <samuel@ibrium.se>
Version 0.9.60
Configuration file: /etc/molrc
Library directory: /usr/lib/mol
Session 0. Lockfile '/var/lock/mol-0'
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
DEC frequency: 12 MHz, 125:10 mticks/usec
128MB RAM mapped at 0x40000000
Unknown processor id (0009)
Running in PowerPC G3 mode
Property 'cpu/bus-frequency' is missing!
Using Linux keycodes
Using nvram-image 'nvram/nvram.nw'
Video module 'xvideo' installed.
Running on VT 8.
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15,32   { 0.0, 56.2, 70.0, 72.1, 74.9, 99.9 } Hz
MODE: 1024* 768, depth 8,15   { 0.0, 60.0, 70.0 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF

HFS  images/moldisk.i MOL                <read-only>     0 MB
HFS  /dev/sdb5        OS8          <read-write>    8 MB
HFS+ /dev/sdb6        Apps               <read-write> 1010 MB
HFS+ /dev/sdb7        OS9             <read-write> 1045 MB
#my notes:
#these last three partitions are on a seperate SCSI drive, I have OS8.6 on 
another SCSI drive
#with BootX, as a partition along with YDL (see below)
----> (disk_open) Opening /dev/sdb8: No such device or address
----> (disk_open) Opening /dev/sdb9: No such device or address
----> (disk_open) Opening /dev/sdb10: No such device or address
----> (disk_open) Opening /dev/sdb11: No such device or address
----> (disk_open) Opening /dev/sdb12: No such device or address
----> (disk_open) Opening /dev/sdb13: No such device or address
----> (disk_open) Opening /dev/sdb14: No such device or address
----> (disk_open) Opening /dev/sdb15: No such device or address
----> (disk_open) Opening /dev/hdb1: No such device or address
----> (disk_open) Opening /dev/hdb2: No such device or address
----> (disk_open) Opening /dev/hdb3: No such device or address
----> (disk_open) Opening /dev/hdb4: No such device or address
----> (disk_open) Opening /dev/hdb5: No such device or address
----> (disk_open) Opening /dev/hdb6: No such device or address
----> (disk_open) Opening /dev/hdb7: No such device or address
----> (disk_open) Opening /dev/hdb8: No such device or address
----> (disk_open) Opening /dev/hdb9: No such device or address
----> (disk_open) Opening /dev/hdb10: No such device or address
----> (disk_open) Opening /dev/hdb11: No such device or address
----> (disk_open) Opening /dev/hdb12: No such device or address
----> (disk_open) Opening /dev/hdb13: No such device or address
----> (disk_open) Opening /dev/hdb14: No such device or address
----> (disk_open) Opening /dev/hdb15: No such device or address
----> (disk_open) Opening images/moldisk.i: No such file or directory
HFS  /dev/sda8        Macintosh HD       <read-write> 1508 MB BOOT
#this is my partition on the drive with YDL

Loading 'System Folder:Mac OS ROM' from /dev/sda8

Mapping GC at 80800000
RTAS instantiated at 00004000
************ WARNING, phandle == 0 ***********
********* of_quiesce *********
<*> kOpenCommand
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
>>>> Missing RTAS function ABCDEF02 (7/3)<<<<
<*> control - Unrecognized cscode 20
<*> control - Unrecognized cscode 20
<*> control - Unrecognized cscode 20
<*> control - Unrecognized cscode 20