What do all these error messages mean?

[Stefan Hakenberg]

Hi,

I am trying to set up mol.  I had tried to set it up earlier but it 
didn't work well (It ran quite slowly and wouldn't open to the screen size.)

Now I have uninstalled the old version of mol, which I had from the 
YellowDogLinux 2.2 install CD, and have installed the latest version 
from the mol.org webside.  I did molvconfig and then tried startmol -a 
and this is the result:

[root@3-98-237-24-cable stefan]# molvconfig
Running MOL video configurator on VT8
Writing config file /var/lib/mol/fb_modes
  1152 *  768,  54.07 Hz,  Depths:  8 15 32
[root@3-98-237-24-cable stefan]# startmol -a
Loading Mac-on-Linux kernel module:
    /usr/lib/mol/0.9.63/modules/2.4.9/mol.o
Warning: kernel-module version mismatch
         /usr/lib/mol/0.9.63/modules/2.4.9/mol.o was compiled for kernel 
version
2.4.9
         while this kernel is version 2.4.18-0.8a
Warning: loading /usr/lib/mol/0.9.63/modules/2.4.9/mol.o will taint the 
kernel:
no license
Warning: loading /usr/lib/mol/0.9.63/modules/2.4.9/mol.o will taint the 
kernel:
forced load
Loading SheepNet ethernet kernel module:
    /usr/lib/mol/0.9.63/modules/2.4.9/sheep_net.o
Warning: kernel-module version mismatch
         /usr/lib/mol/0.9.63/modules/2.4.9/sheep_net.o was compiled for 
kernel ve
rsion 2.4.9
         while this kernel is version 2.4.18-0.8a
Warning: loading /usr/lib/mol/0.9.63/modules/2.4.9/sheep_net.o will 
taint the ke
rnel: no license
Warning: loading /usr/lib/mol/0.9.63/modules/2.4.9/sheep_net.o will 
taint the ke
rnel: forced load
Copyright (C) 1997-2002 Samuel Rydh <samuel@ibrium.se>
Version 0.9.63
Configuration file: /etc/molrc
Data directory: /usr/share/mol/0.9.63
Session 0. Lockfile '/var/lock/mol-0'
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 24.96 MHz
96MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15   { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32   { 54.7 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
-----> Can't attach to interface <eth0>
Failed to initialize the sheep-<eth0> device
Using EsoundD daemon for sound output

HFS  images/moldisk.i MOL                <read-only>     0 MB
No volumes found in '/dev/sdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/hdb'
HFS  /dev/hda9        bootstrap          <read-only>    10 MB
HFS+ /dev/hda10       Mac OS 9           <read-only>  2150 MB
HFS+ /dev/hda11       NET, UTI, &DOC     <read-only>  5000 MB
HFS+ /dev/hda12       BAC&ARC            <read-only>  4000 MB
HFS+ /dev/hda13       AUD                <read-only>  20000 MB

Searching /dev/hda13 for a 'Mac OS ROM' file
/dev/hda13: No 'Mac OS ROM' file found

Searching /dev/hda12 for a 'Mac OS ROM' file
/dev/hda12: No 'Mac OS ROM' file found

Loading 'System Folder/Mac OS ROM' from /dev/hda11

Mapping GC at 80800000
RVEC Internal Error 700
exiting...
cleaning up...
Terminating threads...
DONE
[root@3-98-237-24-cable stefan]#

Is there anybody who can make sense out of this and tell me what to do 
now, in order to get the mol to run?  Ideal would it be if when starting 
mol I could choose if I wanted to startup into /dev/hda10  "Mac OS 9" or 
/dev/hda10 "NET, UTI, &DOC".  Both partitions have OS 9.2.2.  The other 
partitions do not have system folders.

Thanks for any help!!

Stefan