mol osX & net + Booting OSX 10.2 cd.
David Stanaway
mol-general@lists.maconlinux.org
12 Sep 2002 17:50:46 -0500
On Thu, 2002-09-12 at 16:02, samuel@ibrium.se wrote:
>
> There have been reports that sheep networking does not work
> with the MOL/osx. I'm about to investigate...
I had the same problems with 10.1 and sheep_net (Ping, and dns worked,
but no tcp sockets).
I just installed a dhcpd and set up to use the tun method, and that was
fine.
Everything is working fairly well.
Is it possible to boot off a .dmg ?
I tried in linux:
losetup /dev/loop0 disk.dmg
and: /etc/mol/molrc.osx
blkdev: /dev/loop0 -cd -boot
This is what I get...
Disk /dev/loop1 <read-only> 620 MB BOOT
Disk /dev/hda12 <read-write> 3000 MB
Boot device: /mol-blk/disk@1:0
<*> -------------------------------------------
<*> MacOS X boot loader started
<*> Trying to load /mol-blk/disk@1:0,\mach_kernel.mol
<*> Opening partition [/mol-blk/disk@1:0]...
<*> Ext2InitPartition: 1
<*> Trying to load /mol-blk/disk@1:0,\mach_kernel
<*> Opening partition [/mol-blk/disk@1:0]...
<*> Ext2InitPartition: 2
<*> --> BootX failure: failed to load the mach kernel
cleaning up...
Terminating threads...
Flush_all_PTEs: 0
DONE
--
David Stanaway