Rebuilding mol-kmods

[Arch & Cath]

Since we last talked, the Power Tower died and I am now running on a G3
Beige Tower (Gossamer) under 9.0.4.  With an additional 9GB drive, I now
have enough space to download "Everything" in the YDL2.3 distribution.
Linux 2.4.19-4a now works a lot better and after some fiddling, I got mol
0.9.60-5b working.

Flushed with success, I decided to download 0.9.65-1.  Got some kernel
mismatch messages.  Following the instructions from the web site, I did a
rebuild of mol-kmods.  Everything appears to have worked, however, I now get
this message:

[root@bgp605467bgs root]# startmol -a --loadonly
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/0.9.65/modules/2.4.19/mol.o
/usr/lib/mol/0.9.65/modules/2.4.19/mol.o: unresolved symbol
find_vma_R4dfd872b
/usr/lib/mol/0.9.65/modules/2.4.19/mol.o: unresolved symbol
force_sig_R56a9040d
/usr/lib/mol/0.9.65/modules/2.4.19/mol.o: unresolved symbol
mem_map_Re009ab4d
====================================================================
  Failed to load the module - try recompiling the MOL kernel
  module. Instructions (and information about common problems)
  are available at <http://www.maconlinux.org>.
====================================================================

I also did:
    "ln -sf /usr/include/linux /usr/src/linux/include/linux"
    "ln -sf /usr/include/asm /usr/src/linux/include/asm"

No joy!

Regards,
Arch