startmol -X does not find mach kernel

[Thiemo Kellner]

Hi,=20
=20
I try to start MacOS X (10.1.5) in mol 0.9.69_pre3. However, the execution =
of=20
the programme terminates before a MacOS X windows gets opened stating that =
no=20
mach kernel could be found. I don't know where I configured wrongly. Howeve=
r,=20
at least MacOS 9.1 starts fine in mol. Below I listed the output of the Mac=
OS=20
X try and snippeds of the config files. BTW: I ran molvconfig and startmol=
=20
--keyconfig.=20
=20
Anybody an idea?=20
=20
Cheers,=20
=20
Thiemo=20

System: 1st gen iBook, 288 MB RAM, Gentoo Linux PPC, mol 0.9.69

thiemo@walhalla thiemo $ startmol -X=20
Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh=20
Starting MOL session 1=20
Running in PowerPC G3 mode, 192 MB RAM=20
Timebase: 16.64 MHz, Bus: 66.57 MHz, Clock: 299 MHz=20
Using USB mouse on /dev/input/mice=20
nvram, read_image: open: No such file or directory=20
Creating nvram-image '/var/lib/mol/nvram.x'=20
OHCI USB controller registered=20
Fullscreen video on VT 8.=20
Video driver(s): [xvideo] [console_video]=20
=20
      640* 480, depth 8,15   { 0.0 } Hz=20
      800* 600, depth 8,15,32   { 0.0, 60.3, 70.0, 74.9 } Hz=20
      800* 600, depth 8   { 89.9 } Hz=20
     1024* 768, depth 8,15   { 0.0 } Hz=20
     1152* 864, depth 8,15   { 0.0 } Hz=20
     1280*1024, depth 8,15   { 0.0 } Hz=20
     1600*1200, depth 8,15   { 0.0 } Hz=20
=20
No video mode match the default one.=20
DHCP nameserver exported: 192.168.0.253=20
Internet Software Consortium DHCP Server V3.0pl2=20
Copyright 1995-2003 Internet Software Consortium.=20
All rights reserved.=20
For info, please visit http://www.isc.org/products/DHCP=20
Can't open lease database /var/lib/dhcp/dhcpd.leases: No such file or=20
directory --=20
   check for failed database rewrite attempt!=20
Please read the dhcpd.leases manual page if you=20
don't know what to do about this.=20
=20
If you did not get this software from ftp.isc.org, please=20
get the latest from ftp.isc.org and install that before=20
requesting help.=20
=20
If you did get this software from ftp.isc.org and have not=20
yet read the README, please read it before requesting help.=20
If you intend to request help from the dhcp-server@isc.org=20
mailing list, please read the section on the README about=20
submitting bug reports and requests for help.=20
=20
Please do not under any circumstances send requests for=20
help directly to the authors of this software - please=20
send them to the appropriate mailing list as described in=20
the README file.=20
=20
exiting.=20
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE=20
=20
    CD   /dev/cdrom       CD-ROM         <read-only>   ------=20
----> /dev/hda9 might be a boot-strap partition.=20
----> /dev/hda12 might be a boot-strap partition.=20
    HFS+ /dev/hda14       walhalla       <rw> 5180 MB BOOT=20
    HFS+ /dev/hda15       Classic        <rw> 1029 MB BOOT=20
------> /dev/hda16 is linux-mounted with write privileges.=20
Could not open '/dev/hda16' with read-write permissions=20
------> /dev/hda17 is linux-mounted with write privileges.=20
Could not open '/dev/hda17' with read-write permissions=20
=20
=20
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=20
>> MacOS X Boot Loader 1.1.18=20
>> Candidate boot volume: /mol-blk@0/disk@1:0=20
>> --> Boot loader failure: failed to load the mach kernel=20
=20
cleaning up...=20
Terminating threads...=20
DONE=20
=20


Config snipped with non-standard configuration (/etc/mol/molrc.osx):


# ram_size:             96=20
# disable_altivec:      no=20
ram_size:               192=20
disable_altivec:        yes=20
=20
    blkdev:             /dev/hda        -rw     -boot=20
#     blkdev:           /dev/hda        -rw=20
#     blkdev:           /dev/hdb        -rw=20
#     blkdev:           /dev/sda        -rw=20
#     blkdev:           /dev/sdb        -rw=20
=20
--=20
root ist die Wurzel allen =DCbels