Now MacOS X (Was Re: Can't install MacOS 9)

[Alan Hourihane]

On Mon, Feb 17, 2003 at 12:40:39 +0100, Samuel Rydh wrote:
> On Sun, Feb 16, 2003 at 11:35:25PM +0000, Alan Hourihane wrote:
> > On Thu, Feb 13, 2003 at 03:09:13 +0000, Alan Hourihane wrote:
> > > Unfortunately, now I've got 9.2.1 (upgraded to 9.2.2) I can't put
> > > MacOS X onto the same volume. This disk just isn't recognized at all
> > > under MacOS X.
> > > 
> > > I've got this in my molrc.osx file
> > > 
> > > blkdev:	/dev/hde8	-rw -force
> > > blkdev: /dev/cdrom	-ro -boot
> > > 
> > > These two lines work in the molrc.macos file, but MacOS X just can't
> > > see the disk. 
> > 
> > Actually, I've just tried
> > 
> > blkdev: /dev/hde	-rw
> > 
> > and still no luck getting MacOS X 10.1 seeing any partitions at all.
> 
> So... what does MOL say when you do startmol --osx?

Well, I started MOL with -X (not --osx), but just to make sure I tried
it with that too.

These are the messages that MOL emits....

Alan.

Mac-on-Linux 0.9.68 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 1
Config dir: /etc/mol
Data dir: /usr/local/share/mol/0.9.68
Session 1. Lockfile: /var/lock/mol-1
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 12.50 MHz
96MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Timebase: 12.50 MHz, Bus: 50.00 MHz, Clock: 450 MHz
Using Linux keycodes
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/local/mol/nvram.x'
Could not open '/var/local/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/local/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15   { 0.0 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1024, depth 32   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

parser error: 'resolution' entry malformed
No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
DHCP nameserver exported: 192.168.0.1
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE



HFS+ /dev/hde6        MacOS X            <read-write> 4885 MB 
HFS+ /dev/hde8        Mac On Linux       <read-write> 4885 MB 
HFS+ /dev/hde9        MacOS 9            <read-write> 4885 MB 
CD   /dev/cdrom       CD-ROM             <read-only>   ------ BOOT1


>> ==================================================
>> MacOS X Boot Loader 1.1.17
>> Candidate boot volume: /mol-blk@0/disk@0:9
>> Trying to load /mol-blk@0/disk@0:9,\mach_kernel.mol
>> Trying to load /mol-blk@0/disk@0:9,\mach_kernel
>> mach kernel read (3148008 bytes)
>> Loading from /mol-blk@0/disk@0:9,\System\Library\
>> Force-loading com.apple.iokit.IOAudioFamily
>> Command line: ''
>> ==================================================

<*> MOL acceleration for 10.1 (and later)
<*> MolAudio: 16384/512 bytes
<*> MolEnet::start
<*> MolEnet: setPowerState 1
<*> MolBlockDriver::starting
+ Video Driver v1.12