Problem booting mol on a MPX100

[Robert Schien]

I have problems booting Mac OS X from CD via mol on a 
Motorola MPX100 (Powerstack II).
Here is the output of the command:


robk10:/home/robsch# startmol --osx --config=install
Mac-on-Linux 0.9.66 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 5
Config dir: /etc/mol
Data dir: /usr/local/share/mol/0.9.66
Loading Mac-on-Linux kernel module:
   /usr/local/lib/mol/0.9.66/modules/2.4.21-pre2/mol.o
Warning: loading /usr/local/lib/mol/0.9.66/modules/2.4.21-pre2/mol.o will taint the kernel: forced load
Loading tun driver kernel module:
   /usr/local/lib/mol/0.9.66/modules/2.4.21-pre2/tun.o
Warning: loading /usr/local/lib/mol/0.9.66/modules/2.4.21-pre2/tun.o will taint the kernel: forced load
Session 5. Lockfile: /var/lock/mol-5
Debugger nub disabled
The session save/restore feature is disabled
Error while copying OF device node!
OF device tree: oftrees/oftree.x
Timebase frequency: 16.65 MHz
96MB RAM mapped at 0x40000000
Unknown processor id (0009)
Running in PowerPC G3 mode
Warning: CPU node missing from hardware tree!
The calibration will probably be wrong... will try running anyway.
Please contact your favorite MOL developer about this problem.
Could not open /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
Using Linux keycodes
pci.c: Doesn't look lika a PCI device
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/local/mol/nvram.x'
FIXME: IRQ assignement and device identification
xvideo: X11 video depth 565
Using backing store for X-window
Could not open '/var/local/mol/x11.kbd'
Video module 'xvideo' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15   { 0.0 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
---> DHCP server not installed
Ethernet Interface 'tun-<tun5>' @ 00:00:0D:EA:DB:EE
No volumes found in '/dev/hda'
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'
Disk /dev/cdrom       Partitioned        <read-only>   625 MB BOOT
<*> -------------------------------------------
<*> MacOS X boot loader started
<*> Candidate boot volume: /mol-blk@0/disk@0:9
<*> Trying to load /mol-blk@0/disk@0:9,\mach_kernel.mol
<*> Trying to load /mol-blk@0/disk@0:9,\mach_kernel
<*> mach kernel read (3678188 bytes)
<*> mol owned memory at 0045D000 (1000)
<*> mregs mapped @ 0045e000 (2000)
<*> MacOS X mkext driver archive read (106988 bytes)
<*> DriversPackage-462000
<*> FileLoadDriversMKext /mol-blk@0/disk@0:9,\System\Library\
<*> LoadDrivers: Loading from [/mol-blk@0/disk@0:9,\System\Library\Extensions.mkext]
<*> Command line: ''
<*> Framebuffer at 81000000 (640x480)
<*> Jumping to kernel entrypoint...
<*> -------------------------------------------

and from this point on it seems to be waiting forever.

I have compiled and installed mol-0.9.66 on my system (the kernel drivers, too)
The kernel version is 2.4.21-pre2.

Any ideas how could I go a step further?

I have read about mol-0.9.67. Where is it available?

Thanks in advance. 

Robert