Problems with 0.9.68

[Mike Benham]

I'm having problems with my upgrade to MOL 0.9.68.  I have an 800mhz
TiBook running 2.4.20-ben8.  Here's the startup log:

Mac-on-Linux 0.9.68 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 5
Config dir: /etc/mol
Data dir: /usr/share/mol
Session 5. Lockfile: /var/lock/mol-5
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 33.33 MHz
96MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Timebase: 33.33 MHz, Bus: 133.32 MHz, Clock: 800 MHz
Could not open /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
Using Linux keycodes
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/lib/mol/nvram.x'
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15,32   { 99.7 } Hz
MODE:  800* 600, depth 8,15,32   { 56.2, 70.0, 72.1, 74.8, 74.9, 89.9,
99.9 } Hz
MODE: 1024* 768, depth 8,15,32   { 60.0, 70.0, 75.0 } Hz
MODE: 1152* 768, depth 8,15,32   { 54.7 } Hz
MODE: 1152* 864, depth 8,15,32   { 59.9 } Hz
MODE: 1024*1024, depth 8,15,32   { 103.6 } Hz
MODE: 1280*1024, depth 8,15,32   { 94.9 } Hz
MODE: 1600*1200, depth 8,32   { 0.0 } Hz

Starting in video mode 640*480, depth 32, 99.7 Hz  [offs:0, rb:2560]
---> DHCP server not installed
Ethernet Interface 'tun-<tun5>' @ 00:00:0D:EA:DB:EE



HFS+ /dev/hda9        OSX                <read-write> 19077 MB BOOT


>> ==================================================
>> MacOS X Boot Loader 1.1.17
>> Candidate boot volume: /mol-blk@0/disk@0:0
>> Trying to load /mol-blk@0/disk@0:0,\mach_kernel.mol
>> Trying to load /mol-blk@0/disk@0:0,\mach_kernel
>> mach kernel read (3733508 bytes)
>> Loading from /mol-blk@0/disk@0:0,\System\Library\
>> Force-loading com.apple.iokit.IOAudioFamily
>> Command line: ''
>> ==================================================

...I get the MOL logo in the MOL window, but no further progress is made
and my CPU stays pegged at >90%.  Anyone have any ideas?

- Mike

--
http://www.thoughtcrime.org