Networking problems on Gentoo/OS 8.6

[Toronney Mixon]

I am using Mol 9.68 r4 (Gentoo emerge) on a powercurve
clone (G3 upgrade). my problem is trying to use the
internet on the mol/mac side (thru linux cable modem).
I have read the network man for mol and feel I did all
the steps to have tun driver do the network between
linux and mol/mac, but I get the following error on
the mac side when I try to connect; "Network Error
#-3221" or "Open Transport is returning an error
(-3221)". I can ping the IP or Gateway, here is my
ifconfig output:


root# ifconfig
eth0      Link encap:Ethernet  HWaddr
00:05:9A:80:36:98
          inet addr:68.55.90.35  Bcast:68.55.90.255 
Mask:255.255.255.0
          inet6 addr: fe80::205:9aff:fe80:3698/10
Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST 
MTU:1500  Metric:1
          RX packets:78504 errors:0 dropped:0
overruns:0 frame:0
          TX packets:3594 errors:0 dropped:0
overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:6295624 (6.0 Mb)  TX bytes:585352
(571.6 Kb)
          Interrupt:14 Base address:0x1000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:92 errors:0 dropped:0 overruns:0
frame:0
          TX packets:92 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7456 (7.2 Kb)  TX bytes:7456 (7.2
Kb)

tun0      Link encap:Ethernet  HWaddr
00:FF:56:D9:88:99
          inet addr:192.168.1.1  Bcast:192.168.1.255 
Mask:255.255.255.0
          inet6 addr: fe80::2ff:56ff:fed9:8899/10
Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:100

And when I checked  the kernel for Nat support i got
the following:

root# /sbin/iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination
mol-ns-redirect  tcp  --  anywhere            
192.168.1.1        tcp dpt:domain
mol-ns-redirect  udp  --  anywhere            
192.168.1.1        udp dpt:domain

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination
MASQUERADE  all  --  192.168.1.0/24      !192.168.1.1
MASQUERADE  all  --  192.168.1.0/24     
!192.168.1.0/24

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Chain mol-ns-redirect (2 references)
target     prot opt source               destination
DNAT       all  --  anywhere             anywhere     
     to:68.54.80.6
 My TCP/IP control panel is configure with the mac
having address 192.168.1.255, subnet mask having
255.255.255.0, router address is 192.168.1.1, connect
via ethernet slot J1, and configure Manually.

What maybe the answer? Thanks

Regards,
Tony

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com