MOL 0.9.68 with YDL 3.0 on a 17" iMac iLamp using OSX 10.2.6

[Jeremy R. Gilby]

I'm wondering if this setup is even possible.

If anyone else has had success with this setup, I'd be happy to hear
some suggestions.

Here is my readout when trying to run MOL:

Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Running in PowerPC G4 mode, 128 MB RAM
Timebase: 24.96 MHz, Bus: 99.84 MHz, Clock: 800 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [xvideo] [console_video]

    640* 480, depth 8,15   { 0.0 } Hz
    800* 600, depth 8,15   { 0.0 } Hz
   1024* 768, depth 8,15   { 0.0 } Hz
   1152* 864, depth 8,15   { 0.0 } Hz
   1440* 900, depth 8   { 0.0 } Hz
   1280*1024, depth 8,15   { 0.0 } Hz
   1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 172.17.49.177
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

   CD   /dev/cdrom       CD-ROM         <read-only>   ------
   HFS+ /dev/hda11       MAC OS X       <rw> 25942 MB BOOT
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'

=============================================================
Mac-on-Linux OpenFirmware 0.9.12
Searching MAC OS X for a 'Mac OS ROM' file
os_seek error
--- No bootable disk was found! -----------------------------
If this is an oldworld machine, try booting from the MacOS
install CD and install MacOS from within MOL.
-------------------------------------------------------------
cleaning up...
Terminating threads...
DONE