Network and MOL

[Mark Jaffe]

I have a Pismo G3/400 with 384Mb RAM and 20Gb hd partitioned as 7.8Gb for
OS9 (hda9) then 7.8Gb for OS X (hda10) then YDL on the rest (boot + swap +
/)

I've been successful in bringing up mol in both 9.2 and 10.2.6 but have a
couple of issues remaining:

 1. Video settings -
    I have the video set to 800/600 which is respected by
 9.2.2; but 10.2.6 insists on taking over the entire screen
 (1024x768 on my laptop)  I finally figured out how to switch
 back to YDL with the function key but it is still awkward.
 
 2. Networking -
   I setup to use tun and the airport eth1 device, but I
  still can't get a connection in either OS9 or OSX. OSX
  Network settings show no available device, and OS9 TCP/IP
 control panel now shows two new devices: Ethernet slot J1 and
 J2. Not sure what to do...

Mark
==========================================================
Mark Jaffe              | (408) 972-9638 (home)
Chief Wizard            | (408) 807-1530 (cell/page/voicemail)
Computer Wizards        | (425) 795-6421 (FAX)
wizards44@earthlink.net | http://www.wizdev.net/