OSX-installation fails

[mol-general@lists.maconlinux.org]

Hi!

I try to install osx 10.1 on a separate scsi-disk (/dev/sdb) from
mol-0.9.70
on a rs6k 43P-140 604e 332MHz running Suse 7.3 with kernel:2.4.20-pre7.

I can format & partition the disk from within the OSX-installer.
The installation starts and runs for a while.

Then the installer aborts when "Configuring OSX".
"There were errors installing the software, Please try installing again"

This is how molrc.osx looks like:
------------------------------------
ram_size:               256
disable_altivec:        yes
processor:              601  # Tried with 604 but it paniced.

blkdev:             /tmp/cdimage.osx      -boot1
blkdev:             /dev/sdb                   -rw  -whole

autoprobe_scsi:         no
scsi_dev:               "0:0:6"
enable_usb:             no
------------------------------------

/dev/sdb looks like this, when partitioned by osx-installer
pdisk -l /dev/sdb

Partition map (with 512 byte blocks) on '/dev/sdb'
 #:                type name              length   base     ( size )
 1: Apple_partition_map 'Apple          '       63 @ 1
 2:      Apple_Driver43*'Macintosh      '       56 @ 64
 3:      Apple_Driver43*'Macintosh      '       56 @ 120
 4:    Apple_Driver_ATA*'Macintosh      '       56 @ 176
 5:    Apple_Driver_ATA*'Macintosh      '       56 @ 232
 6:      Apple_FWDriver 'Macintosh      '      512 @ 288
 7:  Apple_Driver_IOKit 'Macintosh      '      512 @ 800
 8:       Apple_Patches 'Patch Partition'      512 @ 1312
 9:           Apple_HFS 'Mac_OS_X       ' 17914408 @ 1824     (  8.5G)
10:          Apple_Free '               '        8 @ 17916232
-----------------------------------------
On console:
# startmol -X
Mac-on-Linux 0.9.70 [Apr 1 2004 07:57]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Unknown processor id (A0100).
Unknown processor type 601
Running in PowerPC 750 mode, 256 MB RAM
Timebase: 16.61 MHz, Bus: 66.47 MHz, Clock: 332 MHz
Using ps2 mouse on /dev/psaux
Could not open '/var/local/mol/x11.kbd'
Using backing store for X-window
Video driver(s): [xvideo]

     640* 480, depth 8,32   { 0.0 } Hz
     800* 600, depth 8,32   { 0.0 } Hz
    1024* 768, depth 8,32   { 0.0 } Hz
    1152* 864, depth 8,32   { 0.0 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,32   { 0.0 } Hz

No video mode match the default one.
---> /sbin/iptables not found.
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
MOL SCSI controller registered

    [SCSI auto-probing disabled]

    /dev/sg2 SCSI-<0:0:6> DISK IBM      DDYS-T09170N     S80D

    Disk /tmp/fil                        <read-only>   641 MB BOOT1
    SCSI /dev/sdb  [skipped - handled as a generic SCSI device]

>> ==================================================
>> MacOS X Boot Loader 0.9.70
>> Candidate boot volume: /mol-blk@0/disk@0:9
>> /mol-blk@0/disk@0:9,\mach_kernel [10.1] (3148008 bytes)
>> /mol-blk@0/disk@0:9,\System\Library\Extensions.mkext
>> ==================================================

<*> MOL acceleration for 10.1
<*> Block Driver v1.1
<*> SCSI driver v1.03
Mounting MOL driver disk
+ Video Driver v1.12
----------------------------------------------------

OSX installation log:
Mac OS X Installation Log
        Target Selection
        Disk Events
        Selected volume "Mac_OS_X"
                Mounted at: /private/var/tmp/Mount01
                OpenFirmware: /mol-scsi/@0:9
                Partition type: Apple_HFS
                Partition map /dev/disk2
                Partition: 9
                Protocoll: SCSI
                Media Type: Generic
                Volume Size: 8747
        Disk Controller
        Startup Disk Support
        Installing with target /private/var/tmp/Mount03
        ERROR:(null) - pax: error 2:Unable to read files from
/private/var/tmp/Mount03/.OSInstall-temp/.OSInstall.mpkg.68.install/BaseSystem.bo...........
-----------------------------------------------------

Any Ideas, anyone?

Best regards
Christian