mol problem. macosx partition locked. any suggestions?

[Roger Scow]

Here's the output on the terminal when I run mol.  I'm not sure about
what to do with the mol/kernel mismatch and tainted kernel.

Anyway, this is what I ended up with after running molvconfig again:

Roger

[rscow@localhost rscow]$ startmol -X
Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 1
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/0.9.69/modules/2.4.22-2g/mol.o
Warning: loading /usr/lib/mol/0.9.69/modules/2.4.22-2g/mol.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module mol loaded, with warnings
Loading tun driver kernel module:
   /usr/lib/mol/0.9.69/modules/2.4.22-2g/tun.o
Warning: loading /usr/lib/mol/0.9.69/modules/2.4.22-2g/tun.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module tun loaded, with warnings
Unknown processor id (70000202).
Running in PowerPC 750 mode, 196 MB RAM
Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 800 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered
Fullscreen video on VT 8.
Video driver(s): [console_video]

     640* 480, depth 8,15,32   { 59.9, 72.1, 74.9, 89.9, 99.7, 116.6 }
Hz
     800* 600, depth 8,15,32   { 56.2, 60.3, 70.0, 72.1, 74.9, 89.9,
94.8, 96.3, 99.9 } Hz
    1024* 768, depth 8,15,32   { 0.0, 60.0, 70.0, 72.2, 74.8, 75.0,
75.0, 86.9, 90.2, 99.7 } Hz
    1152* 768, depth 8,15,32   { 54.7 } Hz
    1280* 854, depth 8,15,32   { 60.0 } Hz
    1152* 864, depth 8,15,32   { 59.9 } Hz
    1024*1024, depth 8,15,32   { 103.6 } Hz
    1152* 864, depth 8,15,32   { 69.9, 74.9, 79.7, 87.0, 94.8 } Hz
    1280*1024, depth 8,15,32   { 60.0, 60.0, 70.0, 74.1, 75.0, 94.9 } Hz
    1600*1200, depth 8,15,32   { 59.9, 65.9, 76.1 } Hz

Autoswitching to console
DHCP nameserver exported: 66.196.0.1
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
MOL SCSI controller registered

    /dev/sg0 SCSI-<0:0:0> CD/DVD TOSHIBA  DVD-ROM SD-R2212 1P19

    HFS+ /dev/hda9                       <rw> 66083 MB BOOT


>> ==================================================
>> MacOS X Boot Loader 1.1.18
>> Candidate boot volume: /mol-blk@0/disk@0:0
>> /mol-blk@0/disk@0:0,\mach_kernel (3859004 bytes)
>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
>> ==================================================

<*> Block Driver v1.1
<*> SCSI driver v1.03

On Mon, 2004-08-30 at 08:08, Stefan Jeglinski wrote:
> >Well, Bill, I tried that.  No joy.  Weird.  My /var/log/mol.1.log file
> >doesn't have any errors anymore, either.  Likewise, of course, the
> >output in the terminal.
> >
> >Still getting the resolution/depth not supported.
> 
> Well, you had to have run molvconfig at some point. But try running 
> it again, and let it test as many resolutions as possible.
> 
> 
> >I'm stumped.
> 
> I'm reaching, but wth.
> 
> 
> Stefan Jeglinski
> 
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general