MOL on FC4

[Jesse Keating]

On Sun, 2005-11-20 at 00:19 +0100, Mattias Nissler wrote:
> It seems the tun.c is missing. For the 2.6 trees it should be a symlink
> to $(KERNEL_SOURCE)/drivers/net/tun.c
> 
> You should check
> 
> a) whether the obj-ppc/build/src/netdriver/tun.c file exists and is a
> symlink
> b) if it is one, where it points to and whether the destination exists.
> It should point into the linux source tree for 2.6 kernels.
> 
> What you can also try is disabling the TUN build configuration option.
> As far as I have checked it will only built the tun kernel module that
> you can get from the kernel sources as well.

Ok, I got the modules to load, and I've installed the mol package.  Now
however, startmol things that the mol.ko module isn't loaded, however it
is...

[root at obi-wan ~]# startmol --test
/usr/lib/mol/0.9.70/bin/mol: /usr/lib/libpng12.so.0: no version information available (required by /usr/lib/mol/0.9.70/bin/mol)
Mac-on-Linux 0.9.70 [Mar 27 2004 12:18]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 0
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/0.9.70/modules/2.6.14-1.1637_FC4/mol.ko
Creating the /dev/sheep_net device node.
Loading SheepNet kernel module:
   /usr/lib/mol/0.9.70/modules/2.6.14-1.1637_FC4/sheep.ko
Creating the /dev/net/tun device node.
Loading tun driver kernel module:
   /usr/lib/mol/0.9.70/modules/2.6.14-1.1637_FC4/tun.ko
Removing stale lockfile /var/lock/mol-0
Fatal error: Error: The MOL kernel module is not loaded

Any thoughts about this?