[powerstation-owners] powerstation comp. list update
acrux
acrux_it at libero.it
Thu May 19 03:48:20 JST 2011
On Thu, 12 May 2011 21:20:08 +1000
Benjamin Herrenschmidt <benh at kernel.crashing.org> wrote:
_omissis__
> Note that there are significant differences in HW between the slots on
> the powerstation. One slot (x16) is directly connected to the Apple/IBM
> CPC945 northbridge while others are behind Broadcom
> hypertransport<->PCIe bridges.
>
> My experience is that some work better than others for some kinds of
> card (no specific rule here, but worth trying moving cards around in
> case of problems).
>
with this Belkin F5U602ea [1] i've a lot of :
usb 1-1: reset high speed USB device number 4 using ehci_hcd
and in the worse case something like that:
usb 1-1: reset high speed USB device number 4 using ehci_hcd
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb] Result: hostbyte=0x05 driverbyte=0x00
sd 6:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 90 10 4f 00 00 08 00
end_request: I/O error, dev sdb, sector 9441359
Buffer I/O error on device sdb1, logical block 9441296
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441297
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441298
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441299
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441300
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441301
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441302
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 9441303
lost page write due to I/O error on sdb1
usb 1-1: USB disconnect, device number 4
usb 1-1: new high speed USB device number 5 using ehci_hcd
usb 1-1: New USB device found, idVendor=152d, idProduct=2338
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1: Product: USB to ATA/ATAPI Bridge
usb 1-1: Manufacturer: JMicron
usb 1-1: SerialNumber: D57CA3932565
scsi7 : usb-storage 1-1:1.0
scsi 7:0:0:0: Direct-Access WDC WD50 00AAKB-00H8A0 4E05 PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI disk
usb 1-1: reset high speed USB device number 5 using ehci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: reset high speed USB device number 5 using ehci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: reset high speed USB device number 5 using ehci_hcd
usb 1-1: device not accepting address 5, error -71
usb 1-1: reset high speed USB device number 5 using ehci_hcd
usb 1-1: device not accepting address 5, error -71
sd 7:0:0:0: Device offlined - not ready after error recovery
usb 1-1: USB disconnect, device number 5
sd 7:0:0:0: [sdb] Unhandled error code
sd 7:0:0:0: [sdb] Result: hostbyte=0x05 driverbyte=0x00
sd 7:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 1d 04 00 3f 00 00 08 00
end_request: I/O error, dev sdb, sector 486801471
Buffer I/O error on device sdb1, logical block 243400704
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 243400705
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 243400706
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 243400707
lost page write due to I/O error on sdb1
sd 7:0:0:0: rejecting I/O to offline device
usb 1-1: new high speed USB device number 6 using ehci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: new high speed USB device number 7 using ehci_hcd
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: new high speed USB device number 8 using ehci_hcd
usb 1-1: device not accepting address 8, error -71
usb 1-1: new high speed USB device number 9 using ehci_hcd
usb 1-1: device not accepting address 9, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 2-1: new full speed USB device number 2 using ohci_hcd
usb 2-1: device descriptor read/64, error -62
usb 2-1: device descriptor read/64, error -62
usb 2-1: new full speed USB device number 3 using ohci_hcd
usb 2-1: device descriptor read/64, error -62
usb 2-1: device descriptor read/64, error -62
usb 2-1: new full speed USB device number 4 using ohci_hcd
usb 2-1: device not accepting address 4, error -62
usb 2-1: new full speed USB device number 5 using ohci_hcd
usb 2-1: device not accepting address 5, error -62
hub 2-0:1.0: unable to enumerate USB device on port 1
and this happens with every external usb storage that normally works fine with other my machines.
This issue really hurts me... as i only use it headless. My kernel is 2.6.29-rc7
> As for the FireGL V5600, what kind of card is this ? IE. What
> generation ? (what does lspci and what does the radeon driver says ?)
>
i've this:
IRQ's not enabled, falling back to busy waits: 2 0
but only when i run something like glxgears.
Here my Xorg.0.log
http://cruxppc.org/~acrux/Xorg.0.log
root at radio:/usr/src# lspci
0000:f0:0b.0 PCI bridge: Apple Computer Inc. CPC945 PCIe Bridge
0000:f1:00.0 VGA compatible controller: ATI Technologies Inc RV630GL [FireGL v5600]
0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev b0)
0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev b0)
0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0)
0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0)
0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0)
0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev b0)
0001:00:07.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
0001:00:08.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
0001:00:08.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
0001:01:01.0 RAID bus controller: IBM Obsidian chipset SCSI controller (rev 01)
0001:02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 10)
0001:02:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 10)
0001:03:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03)
0001:04:01.0 USB Controller: NEC Corporation USB (rev 43)
0001:04:01.1 USB Controller: NEC Corporation USB (rev 43)
0001:04:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0001:04:02.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
0001:08:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB OHCI (rev 0b)
0001:08:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB OHCI (rev 0b)
0001:08:02.0 Serial controller: Exar Corp. XR17C/D152 Dual PCI UART (rev 02)
acrux at radio:~$ glxinfo
name of display: :0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_apkginfo ddress, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: Mesa DRI R600 (RV630 958C) 20090101 TCL
OpenGL version string: 2.1 Mesa 7.10.2
OpenGL shading language version string: 1.20
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_clamp, GL_ARB_depth_texture,
GL_ARB_draw_buffers, GL_ARB_draw_elements_base_vertex,
GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
GL_ARB_fragment_shader, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_provoking_vertex,
GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shadow_ambient,
GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture3D, GL_EXT_texture_compression_dxt1,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture,
GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_vertex_array_bgra,
GL_EXT_vertex_array, GL_OES_EGL_image, GL_OES_read_format,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_ATI_separate_stencil, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_window_pos,
GL_MESAX_texture_float, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_depth_clamp, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_S3_s3tc, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
8 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x73 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x74 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x75 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x76 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x77 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6a 32 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 Ncon
8 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x6b 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6d 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6f 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x71 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x72 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
[1] http://www.belkin.com/images/product/F5U602/PRN1_F5U602.jpg
[2] http://www.worldofmicro.fr/images/ati%20v5600%20%5BWorld%20Of%20Micro%5D.jpg
--
acrux <acrux_it at libero.it>
More information about the powerstation-owners
mailing list