Firewire CD-RW...
Dylan
yellowdog-general@lists.terrasoftsolutions.com
Sun Jun 1 02:04:01 2003
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
Bill Fink wrote:<br>
<blockquote type="cite"
cite="mid20030531121525.7ea1212f.billfink@mindspring.com">
<pre wrap="">Hi Dylan,
On Sat May 31 2003, Dylan wrote:
</pre>
<blockquote type="cite">
<pre wrap="">I am trying to get a Formac 24/12/32 Firewire CD-RW to work with YDL
3.0. I have gone through all the motions for loading the proper modules
and scanning the scsi bus as instructed by various sites and lists.
When scanning it recognises that something is there, but I can't mount
the drive (/dev/sda (also tried numerous other sd**)). The site
<a class="moz-txt-link-abbreviated" href="http://www.linux1394.org">www.linux1394.org</a> claims that the Formac drives "Work great" under linux .
Can anyone give me a heads up as to what to do or if I am doing anything
wrong?
</pre>
</blockquote>
<pre wrap=""><!---->
What does dmesg say when you "modprobe ohci1394" and when you
"modprobe sbp2"?
One thing to try would be getting the latest SVN tarball from
<a class="moz-txt-link-abbreviated" href="http://www.linux1394.org">www.linux1394.org</a> and replacing /usr/src/linux/drivers/ieee1394
with the latest SVN version and then rebuilding and reinstalling
the kernel modules (although if you're also using dv1394 that
doesn't appear to work with the latest version but sbp2 should
be fine).
-Bill
_______________________________________________
yellowdog-general mailing list
<a class="moz-txt-link-abbreviated" href="mailto:yellowdog-general@lists.terrasoftsolutions.com">yellowdog-general@lists.terrasoftsolutions.com</a>
<a class="moz-txt-link-freetext" href="http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general">http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general</a>
</pre>
</blockquote>
Bill,<br>
<br>
My dmesg after the modules are installed are as follows:<br>
<br>
Memory BAT mapping: BAT2=256Mb, BAT3=128Mb, residual: 0Mb<br>
Total memory = 384MB; using 1024kB for hash table (at c0400000)<br>
Linux version 2.4.20-8d (<a class="moz-txt-link-abbreviated" href="mailto:dburcaw@skyfox.terraplex.com">dburcaw@skyfox.terraplex.com</a>) (gcc version
3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a)) #1 Sat Mar 15 19:38:12
EST 2003<br>
Found Uninorth memory controller & host bridge, revision: 8<br>
Mapped at 0xfdf0c000<br>
Found a Keylargo mac-io controller, rev: 3, mapped at 0xfde8c000<br>
Processor NAP mode on idle enabled.<br>
PowerMac motherboard: PowerBook Titanium<br>
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number:
0->0<br>
hose pci, pci_mem_offset: 00000000, start0: f1000000<br>
io_base_virt: fd689000, io_base_phys: f0000000, isa_mem_base: 00000000<br>
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number:
0->1<br>
hose pci, pci_mem_offset: 00000000, start0: f3000000<br>
io_base_virt: fce87000, io_base_phys: f2000000, isa_mem_base: 00000000<br>
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number:
0->0<br>
hose pci, pci_mem_offset: 00000000, start0: f5000000<br>
io_base_virt: fc685000, io_base_phys: f4000000, isa_mem_base: 00000000<br>
PMU driver 2 initialized for Core99, firmware: 0c<br>
On node 0 totalpages: 98304<br>
zone(0): 98304 pages.<br>
zone(1): 0 pages.<br>
zone(2): 0 pages.<br>
Kernel command line: root=/dev/hda4 ro <br>
PowerMac using OpenPIC irq controller<br>
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc63e000<br>
OpenPIC timer frequency is 4.166666 MHz<br>
GMT Delta read from XPRAM: 60 minutes, DST: on<br>
time_init: decrementer frequency = 24.966218 MHz<br>
Console: colour dummy device 80x25<br>
Calibrating delay loop... 996.14 BogoMIPS<br>
Memory: 383368k available (1964k kernel code, 1004k data, 172k init, 0k
highmem)<br>
AGP special page: 0xd7fff000<br>
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)<br>
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)<br>
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)<br>
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)<br>
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)<br>
POSIX conformance testing by UNIFIX<br>
PCI: Probing PCI hardware<br>
Scanning bus 00<br>
Found 00:58 [106b/0020] 000600 00<br>
Found 00:80 [1002/4c46] 000300 00<br>
Fixup res 1 (101) of dev 00:10.0: 400 -> 802400<br>
Fixups for bus 00<br>
Bus scan for 00 returning with max=00<br>
Scanning bus 10<br>
Found 10:58 [106b/001f] 000600 00<br>
Found 10:b8 [106b/0022] 00ff00 00<br>
Found 10:c0 [106b/0019] 000c03 00<br>
Found 10:c8 [106b/0019] 000c03 00<br>
Found 10:d0 [104c/ac1e] 000607 02<br>
Fixups for bus 10<br>
Scanning behind PCI bridge 10:1a.0, config 010100, pass 0<br>
Scanning behind PCI bridge 10:1a.0, config 010100, pass 1<br>
Bus scan for 10 returning with max=14<br>
Scanning bus 24<br>
Found 24:58 [106b/001e] 000600 00<br>
Found 24:70 [106b/0018] 000c00 00<br>
Found 24:78 [106b/0021] 000200 00<br>
Fixups for bus 24<br>
Bus scan for 24 returning with max=24<br>
Can't get bus-range for /pci@f2000000/cardbus@1a<br>
PCI->OF bus map:<br>
0 -> 0<br>
16 -> 0<br>
36 -> 0<br>
PCI:00:10.0: Resource 0: b4000000-b7ffffff (f=1208), vd: 1002, dev: 4c46<br>
PCI:00:10.0: Resource 2: b0000000-b0003fff (f=200), vd: 1002, dev: 4c46<br>
PCI:10:17.0: Resource 0: 80000000-8007ffff (f=200), vd: 106b, dev: 0022<br>
PCI:10:1a.0: Resource 0: a0000000-a0000fff (f=200), vd: 104c, dev: ac1e<br>
PCI:24:0f.0: Resource 0: f5200000-f53fffff (f=200), vd: 106b, dev: 0021<br>
PCI:00:10.0: Resource 1: 00802400-008024ff (f=101), vd: 1002, dev: 4c46<br>
PCI:10:18.0: Resource 0: a0002000-a0002fff (f=200), vd: 106b, dev: 0019<br>
PCI:10:19.0: Resource 0: a0001000-a0001fff (f=200), vd: 106b, dev: 0019<br>
PCI:24:0e.0: Resource 0: f5000000-f5000fff (f=200), vd: 106b, dev: 0018<br>
Linux NET4.0 for Linux 2.4<br>
Based upon Swansea University Computer Society NET3.039<br>
Initializing RT netlink socket<br>
Thermal assist unit using timers, shrink_timer: 200 jiffies<br>
Starting kswapd<br>
VFS: Diskquotas version dquot_6.4.0 initialized<br>
Journalled Block Device driver loaded<br>
Installing knfsd (copyright (C) 1996 <a class="moz-txt-link-abbreviated" href="mailto:okir@monad.swb.de">okir@monad.swb.de</a>).<br>
udf: registering filesystem<br>
PCI: Enabling device 00:10.0 (0086 -> 0087)<br>
aty128fb: Rage Mobility M3 (AGP) [chip rev 0x0] 8M 128-bit SDR SGRAM
(1:1)<br>
Console: switching to colour frame buffer device 144x48<br>
Registered "ati" backlight controller, level: 15/15<br>
fb0: ATY Rage128 frame buffer device on PCI<br>
input0: Macintosh mouse button emulation<br>
pty: 256 Unix98 ptys configured<br>
Uniform Multi-Platform E-IDE driver Revision: 6.31<br>
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx<br>
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2<br>
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0<br>
ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1<br>
Probing IDE interface ide0...<br>
hda: IBM-DJSA-230, ATA DISK drive<br>
Probing IDE interface ide1...<br>
hdc: MATSHITADVD-ROM SR-8187, ATAPI CD/DVD-ROM drive<br>
Probing IDE interface ide2...<br>
ide0 at 0xdca56000-0xdca56007,0xdca56160 on irq 19<br>
ide1 at 0xdca5a000-0xdca5a007,0xdca5a160 on irq 20<br>
hda: Enabling Ultra DMA 4<br>
blk: queue c02f4690, I/O limit 4095Mb (mask 0xffffffff)<br>
hda: 58605120 sectors (30006 MB) w/1874KiB Cache, CHS=58140/16/63,
UDMA(66)<br>
hdc: Enabling MultiWord DMA 2<br>
hdc: ATAPI 46X DVD-ROM drive, 512kB Cache, (U)DMA<br>
Uniform CD-ROM driver Revision: 3.12<br>
Partition check:<br>
hda: [mac] hda1 hda2 hda3 hda4<br>
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize<br>
loop: loaded (max 8 devices)<br>
SCSI subsystem driver Revision: 1.00<br>
scsi0 : SCSI host adapter emulation for IDE ATAPI devices<br>
mesh: configured for synchronous 5 MB/s<br>
macserial: i2c-modem detected, id: 1<br>
PowerMac Z8530 serial driver version 2.0<br>
tty00 at 0xd98e9020 (irq = 22) is a Z8530 ESCC (internal modem)<br>
tty01 at 0xd98f0000 (irq = 23) is a Z8530 ESCC (IrDA)<br>
Macintosh non-volatile memory driver v1.0<br>
apm_emu: APM Emulation 0.5 initialized.<br>
usb.c: registered new driver usbdevfs<br>
usb.c: registered new driver hub<br>
PCI: Enabling device 10:18.0 (0000 -> 0002)<br>
PCI: Enabling bus mastering for device 10:18.0<br>
usb-ohci.c: USB OHCI at membase 0xd98f6000, IRQ 27<br>
usb-ohci.c: usb-10:18.0, Apple Computer Inc. KeyLargo USB<br>
adb: starting probe task...<br>
usb.c: new USB bus registered, assigned bus number 1<br>
hub.c: USB hub found<br>
hub.c: 2 ports detected<br>
PCI: Enabling device 10:19.0 (0000 -> 0002)<br>
PCI: Enabling bus mastering for device 10:19.0<br>
usb-ohci.c: USB OHCI at membase 0xd98f8000, IRQ 28<br>
usb-ohci.c: usb-10:19.0, Apple Computer Inc. KeyLargo USB (#2)<br>
usb.c: new USB bus registered, assigned bus number 2<br>
hub.c: USB hub found<br>
hub.c: 2 ports detected<br>
usb.c: registered new driver hid<br>
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <a class="moz-txt-link-rfc2396E" href="mailto:vojtech@suse.cz"><vojtech@suse.cz></a><br>
hid-core.c: USB HID support drivers<br>
mice: PS/2 mouse device common for all mice<br>
NET4: Linux TCP/IP 1.0 for NET4.0<br>
IP Protocols: ICMP, UDP, TCP, IGMP<br>
IP: routing cache hash table of 4096 buckets, 32Kbytes<br>
TCP: Hash tables configured (established 32768 bind 65536)<br>
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.<br>
RAMDISK: Compressed image found at block 0<br>
Freeing initrd memory: 608k freed<br>
VFS: Mounted root (ext2 filesystem).<br>
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f<br>
ADB keyboard at 2, handler 1<br>
Detected ADB keyboard, type ISO, swapping keys.<br>
input1: ADB HID on ID 2:2.c4<br>
input2: ADB HID on ID 7:7.1f<br>
ADB mouse at 3, handler set to 4 (trackpad)<6>kjournald
starting. Commit interval 5 seconds<br>
EXT3-fs: mounted filesystem with ordered data mode.<br>
<br>
input3: ADB HID on ID 3:3.01<br>
adb: finished probe task...<br>
Freeing unused kernel memory: 172k init 8k chrp 8k prep<br>
hub.c: new USB device 10:18.0-1, assigned address 2<br>
input4: USB HID v10.01 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on
usb1:2.0<br>
hub.c: new USB device 10:19.0-1, assigned address 2<br>
hub.c: USB hub found<br>
hub.c: 4 ports detected<br>
hub.c: new USB device 10:19.0-1.2, assigned address 3<br>
usb.c: USB device 3 (vend/prod 0x4b8/0x5) is not claimed by any active
driver.<br>
hub.c: new USB device 10:19.0-1.4, assigned address 4<br>
usb.c: USB device 4 (vend/prod 0xa5c/0x2033) is not claimed by any
active driver.<br>
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal<br>
Adding Swap: 786424k swap-space (priority -1)<br>
bluetooth.c: USB Bluetooth support registered<br>
usb.c: registered new driver bluetty<br>
bluetooth.c: found interrupt in<br>
bluetooth.c: found bulk in<br>
bluetooth.c: found bulk out<br>
bluetooth.c: USB Bluetooth converter detected<br>
bluetooth.c: Bluetooth converter now attached to ttyUB0 (or usb/ttub/0
for devfs)<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: found bulk in<br>
bluetooth.c: found bulk out<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: USB Bluetooth tty driver v0.13<br>
usb.c: registered new driver usblp<br>
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2
vid 0x04B8 pid 0x0005<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
bluetooth.c: found bulk in<br>
bluetooth.c: found bulk out<br>
bluetooth.c: usb_bluetooth_probe - improper number of endpoints.
Bluetooth driver not bound.<br>
printer.c: v0.11: USB Printer Device Class driver<br>
ohci1394: $Rev: 578 $ Ben Collins <a class="moz-txt-link-rfc2396E" href="mailto:bcollins@debian.org"><bcollins@debian.org></a><br>
ohci1394_0: Unexpected PCI resource length of 1000!<br>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff]
Max Packet=[2048]<br>
ip_tables: (C) 2000-2002 Netfilter core team<br>
sungem.c:v0.97 3/20/02 David S. Miller (<a class="moz-txt-link-abbreviated" href="mailto:davem@redhat.com">davem@redhat.com</a>)<br>
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:4f:86:be <br>
eth0: Found BCM5221 PHY<br>
eth0: Link is up at 100 Mbps, half-duplex.<br>
eth0: Pause is disabled<br>
i2c-core.o: i2c core module<br>
dmasound_pmac: Awacs/Screamer Codec Mfct: 1 Rev 3<br>
PowerMac Screamer DMA sound driver rev 016 installed<br>
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07<br>
Write will use 4 fragments of 32768 bytes as default<br>
Read will use 4 fragments of 32768 bytes as default<br>
ohci1394: $Rev: 578 $ Ben Collins <a class="moz-txt-link-rfc2396E" href="mailto:bcollins@debian.org"><bcollins@debian.org></a><br>
ohci1394_0: Unexpected PCI resource length of 1000!<br>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff]
Max Packet=[2048]<br>
ieee1394: Host added: Node[00:1023] GUID[00000000fe4f86be] [Linux
OHCI-1394]<br>
scsi1 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)<br>
$Rev: 584 $ James Goodwin <a class="moz-txt-link-rfc2396E" href="mailto:jamesg@filanet.com"><jamesg@filanet.com></a><br>
SBP-2 module load options:<br>
- Max speed supported: S400<br>
- Max sectors per I/O supported: 255<br>
- Max outstanding commands supported: 8<br>
- Max outstanding commands per lun supported: 1<br>
- Serialized I/O (debug): no<br>
- Exclusive login: yes<br>
cdrom: This disc doesn't have any tracks I recognize!<br>
cdrom: This disc doesn't have any tracks I recognize!<br>
CSLIP: code copyright 1989 Regents of the University of California<br>
PPP generic driver version 2.4.2<br>
PPP Deflate Compression module registered<br>
<br>
I have downloaded the up-to-date ieee1394, but haven't had time to
update the drivers yet.<br>
<br>
Thanks,<br>
<br>
Dylan<br>
</body>
</html>