again: Weird ide -> scsi,YDL3

[mamonbbux]

Bill Fink a écrit:
> Check your /etc/yaboot.conf and see if it references the ide-scsi
> for booting linux.

euh... my blanblou (G3 B&W) is happy with BootX, so she and I we don't 
care about yaboot.

ok, at least I've /dev/hdf4 on /mnt/zip and also the scsi-scanner (umax) 
seen on /dev/sg1
But I've had to RECOMPILE since ide-scsi is a "built in".

Now I'm on my way to re-recompile, because :

#1
- dmesg shows :
 >Attached scsi disk sda at scsi1, channel 0, id 5, lun 0
(scsi1:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
  sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
- and /sda I can see into /dev
but pdisk: can't open file '/dev/sda'  (No such device or address)

#2 STILL NO SOUND !( -blanblou can't even say Grrrrrrrrr for that!

#3 sure that I'll put away plenty of built-in or/and modules that 
Blanblou will never care about.

Besides, I've decided NOT to go back to my Ydl_2.3 volume. That is to 
say... well, Ydl_3.0 is not so bad, after all!
-- 
~~~~
<:o)
bisouxxxxxxbbxxxxxxxxx b-:-b
[bb@bbux bb] killall VIH | no need to su to do so

PS1: FREE MUMIA AND LEONARD !
PS2: bize mam' !