MOL on Windtunnel DP 867

[Tom Fowler]

I can't seem to get MOL to start on this machine.  Fresh install of YDL 
3.0.  This is the error message...

Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Running in PowerPC G4 mode, 48 MB RAM
Timebase: 33.30 MHz, Bus: 133.22 MHz, Clock: 866 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [xvideo] [console_video]

      640* 480, depth 8,15   { 0.0 } Hz
      800* 600, depth 8,15   { 0.0 } Hz
     1024* 768, depth 8,15   { 0.0 } Hz
     1152* 864, depth 8,15   { 0.0 } Hz
     1152* 870, depth 8   { 0.0 } Hz
     1280*1024, depth 8,15   { 0.0 } Hz
     1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 68.46.144.6
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

     CD   /dev/cdrom       CD-ROM         <read-only>   ------
     HFS+ /dev/hda9        OS 9 & Backup  <rw> 57219 MB
----> /dev/hdb9 might be a boot-strap partition.
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'


 >> =============================================================
 >> Mac-on-Linux OpenFirmware 0.9.12
 >> os_seek error

 >> --- No bootable disk was found! -----------------------------
 >> If this is an oldworld machine, try booting from the MacOS
 >> install CD and install MacOS from within MOL.
 >> -------------------------------------------------------------
cleaning up...
Terminating threads...
DONE

I have a full MacOS 9.2 installation on /dev/hda9 but it is HFS+.  Could 
  that be the issue?  Also the molvconfig program would not recognize 
ANY of my monitor modes.  It defaulted to console 8 bit color.  This 
machine has a GeForce 4 MX installed.  Is that supported?

Thanks in advance.

Tom