Follow-up, YDL 4 on Pismo

[Mark Jaffe]

On Oct 5, 2004, at 4:12 PM, Felix Jodoin wrote:

> Sorry, this isn't an answer about resolv.conf (although, if it's dhcp,
> delete the leases, which are named dhcpd.lease) but I was wondering if
> you could post your XF86Config as I have the exact same computer and I
> want to install YDL 4.0 on it.
> -Felix
OK, following is contents of XF86Config (for Pismo):

# File generated by Xautoconfig.

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name 
of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/korean:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-2/misc:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-2/75dpi:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-2/100dpi:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-9/misc:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-9/75dpi:unscaled"
	FontPath     "/usr/share/fonts/ISO8859-9/100dpi:unscaled"
	FontPath     "/usr/share/fonts/KOI8-R/misc:unscaled"
	FontPath     "/usr/share/fonts/KOI8-R/75dpi:unscaled"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	#Load	"dri"
EndSection

Section "InputDevice"

# Change "XkbModel" to "macintosh_old" if you are using
# the deprecated adb keycodes.
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "macintosh"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
EndSection

Section "Modes"

	# Generated
	# D: 64.994 MHz, H: 48.359 kHz, V: 59.998 Hz
	Identifier     "Modes0"
	ModeLine     "1024x768" 65.0 1024 1064 1200 1344 768 771 777 806 
-hsync -vsync
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	ModelName    "Monitor Model"
	UseModes     "Modes0"
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 160.0
	Option	    "DPMS"
EndSection

Section "Device"

	### Available Driver options are:-
	#Option	"SWcursor"
	Identifier  "Card0"
	Driver      "r128"
	BoardName   "Unknown video card"
	Option	    "HWcursor"
	Option	    "UseFBDev" "true"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Depth     8
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection

---
Mark Jaffe
mark_jaffe at comcast.net
(408) 972-9638
(408) 807-2093 (cell)