MOL stopping at Video Driver v1.12

[Ryan Spaulding]

Hi,

I am running Yellowdog on a G3 codenamed Gossamer. =A0The mac OS is
living on a seperate drive then the Yellowdog. The just get a xwindow
with a gray screen. I have let it run for over 30 minutes thinking
that
it was just slow but that does not seem to help. I have run molvconfig
a few times till I got a configuration that seemed to work.

Here is where the output stops:

>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>> Mac-on-Linux OpenFirmware 0.9.12
>> Boot Disk: /pci/pci-bridge/mol-blk@0/disk@0:0 [HFS]
>> Loading 'System Folder:Mac OS ROM' from 'untitled'
>> Starting ELF boot loader
>> RTAS instantiated at 00004000
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

>>> Unimplemented RTAS 'abcdef05' (7/1)
 =A0000007D4 =A0 00000009 =A0 00000006 =A0 0000000F =A0 00000018 =A0 000000=
31 =A0 00000000
+ Mouse Driver v1.0
+ Asynchronous Block Driver v1.4
+ Video Driver v1.12

It just sits there and eats up 98% of the CPU.

Any ideas?

Thank you,

Ryan