Please help me to get Fusion driver to load

[Xue, Shan]

> Hi,
> 
> I am trying hook up a Apple Xserve RAID to a Xserve G5 blade, but I
> just can't get the Fusion MPT Fibre Channel driver to load. I have YDL
> 4.0 with the 2.6.10 kernel. The Apple Fibre Channel card is installed
> and the Xserve RAID is attached to the FC card.
> 
> I have been following the procedure described in the HOWTO Configure
> Fibrechannel article
> (www.yellowdoglinux.com/support/solutions/ydl_4.0/fibrechannel.shtml)
> step by step, but still can't get it to work. The following is what
> happened. Has anybody seen a similar problem before? Any help is
> greatly appreciated!
> 
> Many thanks in advance,
> 
> Xue 
> 
> ----------------------------------------------------------------------
> Fusion MPT base driver 3.01.18
> Copyright (c) 1999-2004 LSI Logic Corporation
> PCI: Enabling device: (0001:06:02.0), cmd 7
> mptbase: Initiating ioc0 bringup
> ioc0: FC929: Capabilities={Initiator,Target,LAN}
> PCI: Enabling device: (0001:06:02.1), cmd 7
> mptbase: Initiating ioc1 bringup
> ioc1: FC929: Capabilities={Initiator,Target,LAN}
> Fusion MPT SCSI Host driver 3.01.18
> scsi4 : ioc0: LSIFC929, FwRev=01000600h, Ports=1, MaxQ=1023, IRQ=52
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error issuing abort task!
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error processing TaskMgmt request
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
> mptbase: Initiating ioc0 recovery
> mptbase: ioc0: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc0: Recovered from IOC FAULT
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error issuing abort task!
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error processing TaskMgmt request
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
> mptbase: Initiating ioc0 recovery
> mptbase: ioc0: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc0: Recovered from IOC FAULT
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error issuing abort task!
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
> mptscsih: ioc0: WARNING - Error processing TaskMgmt request
> (sc=c000000001c39280)
> mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
> mptbase: Initiating ioc0 recovery
> mptbase: ioc0: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc0: Recovered from IOC FAULT
> scsi5 : ioc1: LSIFC929, FwRev=01000600h, Ports=1, MaxQ=1023, IRQ=52
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error issuing abort task!
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error processing TaskMgmt request
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
> mptbase: Initiating ioc1 recovery
> mptbase: ioc1: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc1: Recovered from IOC FAULT
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error issuing abort task!
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error processing TaskMgmt request
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
> mptbase: Initiating ioc1 recovery
> mptbase: ioc1: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc1: Recovered from IOC FAULT
> mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
> mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
> mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error issuing abort task!
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
> mptscsih: ioc1: WARNING - Error processing TaskMgmt request
> (sc=c000000001776080)
> mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
> mptbase: Initiating ioc1 recovery
> mptbase: ioc1: WARNING - IOC is in FAULT state!!!
>            FAULT code = 2712h
> mptbase: ioc1: Recovered from IOC FAULT
> -------------------------------------------------------------------
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.terrasoftsolutions.com/pipermail/yellowdog-general/attachments/20050323/138f6eb5/attachment-0001.htm