X11 / Monitor resolution - depht - frequency confusion
Michael Loose
yellowdog-newbie@lists.terrasoftsolutions.com
Thu, 17 Oct 2002 20:23:20 +0200
Running Yellowdog 2.3 on a G4 733 Quicksilver / Gforce 2 MX connected to
an Hitachi CM766ET
(this Monitor does *not* match any of the Hitachis on the list presented
during
the installation - process, choosing a similar modell ends up in an
error when starting X)
The monitor resolution ranges from 640x480 to 1200x1600 at 75Hz.
The h/v frequenzy is 31-96/50-180.
When i enter the specs taken from datasheet in the "advanced" - section
of xconfigurator,
i get an error about "... respawning to fast...delayed for five
minutes.." on starting X.
When i choose the "failsafe"-option, i get a working 640 x 480, 256
colour screen at a very low frequency
When i choose 800 x 600/85Hz i get a working screen at a low frequency
(bleeding eyes)
When i choose 1024x768/75Hz i get a screen w. decent colours and
frequency but the screen is larger than the size of the monitor so i
have to "scroll" it up and down which is really
annoying... -) .
Does any of the experts feel like bringing some light into this affair ?
Any advice is highly appreciated.
/michael