Subject: Avi+Chris Re:YDL install w/ multiple drives
From: C.L. Simco (clsimco@random-specific.com)
Date: Tue Jan 01 2002 - 23:26:13 MST
Avinash and Christopher... Thank you for your valuable time ....
*note to Avinesh:
Avinash Gupta wrote:
> Hmmm ... Since no SCSI devices are attached ... I have a feeling that your
>
> drives are not SCSI drives as your Mac OS device info shows.
I'll try what you suggest tomorrow, as soon as I am back on this
machine. Makes sense!!!
*note to Christopher:
Christopher Murtagh wrote:
> On Tue, 1 Jan 2002, C.L. Simco wrote:
> >SNIP< (oddly since the YDL installation it now takes
> longer by nearly 2 min to start MAC)
You are ultimately right, as I only disconnected
the power, not the ribbon, as well. I discovered this
upon repeated re-connections, doh! Good Call!
> . This sounds like a termination (scsi) or master/slave (ide) problem.
> Cheers,
> Chris
>
---MacOS SYSTEM CONFIGURATION---
==B+W G3-300
==System: Mac OS 8.6
==704 MB Ram
==Virtual memory: off
==+CD Drive ATA 0 ID =0
==+ Iomega Zip ATA0 ID=1
===+= 6 Gig Quantum HD - Internal ATA1 ID=0 (to motherboard)
Partitions: 1 - Format HFS
Name: YDL
Jumpered: Default (Master) Current YDL Installation
=+ Sonnet PCI card
===+= 40 Gig Quantum HD - SCSI Bus1 ID=0
Partitions: 2 - Format HFS+
Jumpered: Cable Select
======+=Partition 1
Name: Darwin-finity- Currently used for Primary Mac OS
8.6
======+=Partition 2
Name: Darwin-bkup- Intended for FUTURE MAC OS 9 - OS X
install/ Backup/ storage
===+= 20 Gig Quantum HD - SCSI Bus1 ID=1
Partitions: 1 - Format HFS+
Name: andbeond
Jumpered: Default (Master) Currently used for Applications
===+= 30 Gig Quantum HD - SCSI Bus1 ID=2
Partitions: 1 - Format HFS+
Name: quantum
Jumpered: Default (Master) Currently used for Scratch Disk/
Storage
This archive was generated by hypermail 2a24 : Tue Jan 01 2002 - 23:39:18 MST