Subject: MMDS connection & ethernet port
From: Philippe Moreau (Phil@T-Nours.com)
Date: Mon Jul 24 2000 - 11:45:36 MDT
Hi all...
I have an asymmetric MMDS connection at home 1.5Mbps/33.6Kbps. This
the technology that Look TV uses to serve High speed internet. The
hardware used is an "Hybrid" (http://www.hybrid.com/) router with a
56K/V.90 modem. Only the router is pluged to my computer directly on
my ethernet card with an RJ45 twisted pair cable. The modem is
pre-configured and pluged directly in the router.
All the networking configurations are made via DHCP, in MacOS all I
have to do is to configure TCP/IP to use DHCP, open my modem and then
send a TCP/IP request by entering an URL in Netscape or opening
another software that sends a TCP/IP request.
I need to send a TCP/IP request via the ethernet port for my modem to
dial but I guess I have to bring up the the "eth0" interface first.
I'm using netcfg to bring up my "eth0" interface but it keeps telling
me, after a while that he couldn't find or querry any IP setings.
I've configured netcfg so it uses DHCP and I've disabled the "eth0"
interface at boot time to avoid a too long boot time.
I've also tried to replace "pumpd" by "dhcpdc" but I not sure wich
files to modify for my system to really use "dhcpdc" ???
Is there a way to test the ethernet card or port (eth0) to see if it
works properly ?
I'm using YellowDogLinux 1.2 with kernel 2.2.15pre19 on a G3/233 Desktop.
Thanks !
---------------------------------------------------------------------
*** ***
************
**********
**********
**********
********
****** Philippe Moreau
**********
************** Phil@T-Nours.com
******************
*** ********** ***
**********
********
******** http://www.cam.org/~tnours/
*** ***
*** ***
*** ***
In a World Without Walls and Fences, Who need Windows and Gates?
---------------------------------------------------------------------
This archive was generated by hypermail 2a24 : Mon Jul 24 2000 - 12:54:26 MDT