Subject: Trouble setting up MOL
From: James Platt (james.platt@yale.edu)
Date: Fri Aug 18 2000 - 09:02:08 MDT
I have been trying to set up MOL and I have come to the point where I am
not sure what to try next to get it to work. I get as far as a happy
Mac face and it freezes (that's progress since I previously only got to
a black screen).
I am using a PM7200 with Mac OS 9.0.4. I saved the standard output and
standard error from MOL to a file and attached it to this message.
I hope that is enough info for some one to help me out. Is it the
2.2.15pre3 kernel or something else?
Thanks,
James
Mac-on-Linux (C) 1997-2000 Samuel Rydh <samuel@ibrium.se>
Uses binaries and modules in /usr/lib/mol
This kernel is NOT runtime patched
Trying to apply MOL runtime patches.
**** Examining '/boot/System.map' ****
**** Success ****
Patching the kernel...
PATCH....0
PATCH....1
PATCH....2
PATCH....3
PATCH....4
PATCH....5
PATCH....6
PATCH....7
PATCH....8
PATCH....9
PATCH....10
PATCH....11
PATCH....12
PATCH....13
PATCH....14
MOL runtime patch installed
Trying to load the Mac-on-Linux kernel module.
Warning: kernel-module version mismatch
/usr/lib/mol/modules/mol.o was compiled for kernel version 2.2.16
while this kernel is version 2.2.15pre3
Warning: kernel-module version mismatch
/usr/lib/mol/modules/sheep_net.o was compiled for kernel version 2.2.16
while this kernel is version 2.2.15pre3
Version 0.9.48
Using resource file '/etc/molrc'
Using MOL library directory '/usr/lib/mol'
MOL kernel module 1.1.48
sym: giveup_altivec [8] C00039D0
Loading OF device tree from 'oftrees/oftree.7200'
32MB RAM mapped at 0x20000000
4096K ROM mapped at 0x4fc00000 from 'rom/rom.7200'
ROM checksum = 0x129
Running in PowerPC 601 mode
DEC frequency: 0x3b9aca00 (1000 MHx), 1000:1 mticks/usec
PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000
GC, Grand Central, (0:16) found
Using nvram-image 'nvram/nvram.ow'
nvram, read_image: open: No such file or directory
Swim3 floppy driver installed
osi_driver: Using IRQ 0x17
osi_driver: Adding pci card at (0:68)
Video module 'xvideo' installed.
Running on VT 8.
Using console mouse driver
Opening the video-mode database '/etc/fb.modes': No such file or
directory
Video module 'console_video' installed.
Video module 'vnc' not installed.
MODE: 640*480, depth 8,15, 0.0 Hz
MODE: 800*600, depth 8,15, 0.0 Hz
MODE: 1024*768, depth 8,15, 0.0 Hz
MODE: 1152*864, depth 8,15, 0.0 Hz
MODE: 1280*1024, depth 15, 0.0 Hz
MODE: 1280*1024, depth 8,15, 0.0 Hz
MODE: 1600*1200, depth 8,15, 0.0 Hz
No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz [offs:0, rb:640]
osi_enet: Attached to network interface <eth0>
osi_enet: MOL Ethernet address is: 00 05 02 40 ba c0
osi_scsi: *** OSI SCSI DISABLED **
53c94 SCSI-driver installed (IRQs 12/0)
------> /dev/sda7 is linux-mounted with write privileges.
HFS disk: 488 MB, /dev/sda7 [read-only]
HFS disk: 0 MB, images/moldisk.im [read-only]
SCSI-Disk (hw-0): 0 MB
osi_sound driver opened
Sound syncvalue: 400
Starting emulation...
Mapping GC at F3000000
dcbi treated as no-op
Unmapping GC
Mapping GC at F3000000
<*> DriveControlCmd IGNORED 48
<*> kOpenCommand
X connection to :0.0 broken (explicit kill or server shutdown).
cleaning up...
WARNING: redraw_thread_not idle
This archive was generated by hypermail 2a24 : Fri Aug 18 2000 - 13:05:00 MDT