Subject: Re: TCP/IP Settings
dnguye8@lsu.edu
Date: Mon Jul 31 2000 - 09:51:52 MDT
do you have the right driver set up for your mac ethernet card
do
dmesg | grep eth
that way you can get the driver number or whatever it is
then plug the number in using
linuxconfig
yummy
From:Steve Whitlow <swhitlow@airapps.com> on 07/31/2000 01:20 PM GMT
Sent by: Steve Whitlow <swhitlow@airapps.com>
Please respond to mol-general@lists.maconlinux.org
To: mol-general@lists.maconlinux.org
cc: (bcc: Dung T Nguyen/dnguye8/LSU)
Subject: TCP/IP Settings
I have installed Linux2000 on a PowerMac 7200. I've got the Gnome interface
running. I've got about 2 days experience with Linux so bear with me. I am
trying to configure my TCP/IP settings but I can't seem to get the proper
combination. I was going by the TCP/IP settings from another Mac (the Linux
box will have the same settings except, obviously, for the IP address).
The
TCP/IP configuration from that Mac is as follows;
Connect Via : Ethernet
Configure : Manually
IP Address : 208.yadda.yadda.yadda
subnet : 255.yadda.yadda.yadda
Router : 208.yadda.yadda.yadda
Name Server : 209.yadda.yadda.yadda
Additional Search : yadda.com
I have dedicated a static IP address for the Linux machine, my question is
in which of the 4 Network Configurator tabs do I need to enter this info
into? I know this is a loaded question as it depends on what we want to do
with the server and all the stuff about localhost and IP Forwarding, but
for
now, I only care about getting it to see the network and browse the
internet. I can't figure out where to put the pieces that I already have.
Here are the four tabs in the Network Configurator, anyone help would be
greatly appreciated.
NAMES:
Hostname:
Domain:
Search for HostNames...:
NameServers:
HOSTS:
IP:
Name:
Nickname:
INTERFACES:
Interface:
IP:
Proto:
atboot:
active:
ROUTING:
Default Gateway:
Default Gateway Device:
---- Interface: Network Address: Netmask: Gateway:Thanks,
Steve
This archive was generated by hypermail 2a24 : Mon Jul 31 2000 - 09:55:52 MDT