Subject: mol (with a kernel 2.2.15pre20) does not work on pismo
From: Toshiaki Tauchi (toshiaki.tauchi@kek.jp)
Date: Fri May 12 2000 - 00:37:02 MDT
Hello,
I am a very beginner of linux/ppc and mol.
I succeeded to rebuild mol with a help of my friend, which is
compatible with a kernel 2.2.15pre20. After startmol, I got the
following messages while the screen was black.
**********************
Mac-on-Linux 0.9.41
(C) 1997-2000 Samuel Rydh, <samuel@ibrium.se>
Using resource file '/etc/molrc'
MOL kernel module 1.1.41
sym: giveup_altivec [8] C00039D0
Loading OF device tree from 'oftrees/oftree.nw'
384MB RAM mapped at 0x30027000
Running in PowerPC 750 mode (G3)
DEC frequency: 0x017cf44a (24 MHx), 249:10 mticks/usec
PCI-bridge 'pci' (bus 0..1) installed at 0x80000000
PCI-bridge DEC,21154 at 0:13
Heathrow, (1:05) found
Using nvram-image 'nvram/nvram.nw'
Video module 'xvideo' not installed.
Running on VT 8.
Using console mouse driver
Video module 'console_video' installed.
MODE: 1024*768, depth 8,15,32, 70.0 Hz
Starting in video mode 1024*768, depth 15, 70.0 Hz [offs:0, rb:2048]
osi_enet: Attached to network interface <eth0>
osi_enet: Ethernet address is: 00 30 65 55 24 d8
osi_scsi: *** OSI SCSI DISABLED **
HFS disk: 2000 MB, /dev/hda [read-only] start: 1544, len:
4096000
HFS disk: 3000 MB, /dev/hda [read-only] start: 4097544, len:
6144000
HFS disk: 3000 MB, /dev/hda [read-only] start: 10241544, len:
6144000
HFS disk: 256 MB, /dev/hda [read-only] start: 16385544, len:
524288
Mapping GC at 80800000
Starting emulation...
Replacing old translation (EA 00100000)
Replacing old translation (EA 00100000)
Replacing old translation (EA 00100000)
Replacing old translation (EA 00100000)
Replacing old translation (EA 00100000)
Replacing old translation (EA 00100000)
---------
The last message continues forever. So I have to kill the mol by
control-c.
Can you help me ?
T.Tauchi, KEK, Japan
This archive was generated by hypermail 2a24 : Fri May 12 2000 - 00:36:20 MDT