Cannot boot OSX installation CD with 0.9.65 on YDL 2.3
Ian Narcisi
mol-general@lists.maconlinux.org
Tue, 10 Dec 2002 12:16:01 -0600
This is a multi-part message in MIME format.
------=_NextPart_000_0012_01C2A045.E7AE90C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I have a PowerBook G4 version 11.3 that has the 3.3.6f5 (newworld) rom =
within it. I have YDL 2.3. I removed the default mol that comes with YDL =
2.3 (Everything Install) and have installed the 0.9.65 version of mol. I =
can boot Mac OS 9.2.2 from a bootup disc without a hitch, but when it =
comes to OSX it is a different story. I performed the updates 'apt-get =
update/upgrade' . I have edited the molrc.osx script, however, any =
changes made are ignored at boot up (startmol, etc). The following is =
the message I get after doing a 'startmol':=20
# startmol --list
--------------------------------------------------------------
Running kernel: 2.4.19-4a
--------------------------------------------------------------
Available modules:
2.4.19-4a in /usr/lib/mol/0.9.65
--------------------------------------------------------------
VIEW MOLRC.OSX:
include ${etc}/molrc.video # video configuration
include ${etc}/molrc.input # mouse and keyboard
include ${etc}/molrc.net # networking
#------------------------------------------------------------------------=
------
# Misc Settings
#------------------------------------------------------------------------=
------
ram_size: 96
disable_altivec: no
#------------------------------------------------------------------------=
------
# OS X Volumes
#------------------------------------------------------------------------=
------
#
# Volumes to be mounted in MacOS X are specified through the
# blkdev keyword:
#
# blkdev: <device> [flags]
#
# Note that <device> should be a _single_ partition (e.g. =
/dev/hda7).
#
# IMPORTANT: IF A COMPLETE DISK IS SPECIFIED instead of just a =
single
# partition, then MOL might fail to guard against the case where a =
particular
# partition is mounted multiple times by different MOL sessions.
# ALWAYS SPECIFY THE PARTION. This issue will be addressed =
eventually.
# Moreover, if an entire disk is specified, then MacOS X will have
# access to _all_ partitions on that disk. This is clearly =
undesirable.
#
# The following flags are supported
#
# -rw/-ro read-write / read-only [default]
# -force force usage of device (be careful!)
# -boot boot from this disk.
#
# For now, the OS X boot disk must be specified through the usage
# of the -boot flag. E.g.
blkdev: /dev/cdrom -cd -boot -force
#blkdev: /dev/hda10 -rw
WITH 'STARTMOL'
# startmol
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Session 0. Lockfile: /var/lock/mol-0
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 24.96 MHz
48MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 640* 480, depth 8,15 { 0.0 } Hz
MODE: 800* 600, depth 8,15 { 0.0 } Hz
MODE: 1024* 768, depth 8,15 { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32 { 54.7 } Hz
MODE: 1152* 864, depth 8,15 { 0.0 } Hz
MODE: 1280*1024, depth 8,15 { 0.0 } Hz
MODE: 1600*1200, depth 8,15 { 0.0 } Hz
Starting in video mode 1152*768, depth 15, 54.7 Hz [offs:0, rb:2304]
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 208.158.239.99
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
Using /dev/dsp for sound output
HFS images/moldisk.i MOL <read-only> 0 MB
HFS /dev/hda9 bootstrap <read-write> 10 MB
----> /dev/hda9 might be a boot-strap partition.
HFS+ /dev/hda10 OSX <read-write> 9537 MB
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'
Searching /dev/hda10 for a 'Mac OS ROM' file
/dev/hda10: No 'Mac OS ROM' file found
Searching /dev/hda9 for a 'Mac OS ROM' file
/dev/hda9: No 'Mac OS ROM' file found
Searching images/moldisk.im for a 'Mac OS ROM' file
images/moldisk.im: No 'Mac OS ROM' file found
--- No bootable disk found ---
No newworld ROM was found
cleaning up...
Terminating threads...
DONE
WITH 'STARTMOL --OSX':
# startmol --osx
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 5
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Session 5. Lockfile: /var/lock/mol-5
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 24.96 MHz
96MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Using Linux keycodes
pci.c: Doesn't look lika a PCI device
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/lib/mol/nvram.x'
FIXME: IRQ assignement and device identification
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 640* 480, depth 8,15 { 0.0 } Hz
MODE: 800* 600, depth 8,15 { 0.0 } Hz
MODE: 1024* 768, depth 8,15 { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32 { 54.7 } Hz
MODE: 1152* 864, depth 8,15 { 0.0 } Hz
MODE: 1280*1024, depth 8,15 { 0.0 } Hz
MODE: 1600*1200, depth 8,15 { 0.0 } Hz
Starting in video mode 1152*768, depth 15, 54.7 Hz [offs:0, rb:2304]
DHCP nameserver exported: 208.158.239.99
Ethernet Interface 'tun-<tun5>' @ 00:00:0D:EA:DB:EE
Disk /dev/cdrom <read-only> 625 MB BOOT
Boot device: /mol-blk/disk@0:0
<*> -------------------------------------------
<*> MacOS X boot loader started
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel.mol
<*> Opening partition [/mol-blk/disk@0:0]...
<*> Ext2InitPartition: 1
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel
<*> Opening partition [/mol-blk/disk@0:0]...
<*> Ext2InitPartition: 2
<*> --> BootX failure: failed to load the mach kernel
cleaning up...
Terminating threads...
DONE
WITH 'STARTMOL -1':
# startmol -1
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 1
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Session 1. Lockfile: /var/lock/mol-1
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 24.96 MHz
48MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 640* 480, depth 8,15 { 0.0 } Hz
MODE: 800* 600, depth 8,15 { 0.0 } Hz
MODE: 1024* 768, depth 8,15 { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32 { 54.7 } Hz
MODE: 1152* 864, depth 8,15 { 0.0 } Hz
MODE: 1280*1024, depth 8,15 { 0.0 } Hz
MODE: 1600*1200, depth 8,15 { 0.0 } Hz
Starting in video mode 1152*768, depth 15, 54.7 Hz [offs:0, rb:2304]
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 208.158.239.99
Ethernet Interface (port 2) 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
Using /dev/dsp for sound output
HFS images/moldisk.i MOL <read-only> 0 MB
HFS+ /dev/cdrom Mac_OS_X_CD <read-only> 624 MB BOOT =
start: 968, len: 1278432
HFS /dev/hda9 bootstrap <read-write> 10 MB
----> /dev/hda9 might be a boot-strap partition.
HFS+ /dev/hda10 OSX <read-write> 9537 MB
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'
Searching /dev/cdrom for a 'Mac OS ROM' file
/dev/cdrom: No 'Mac OS ROM' file found
Searching /dev/hda10 for a 'Mac OS ROM' file
/dev/hda10: No 'Mac OS ROM' file found
Searching /dev/hda9 for a 'Mac OS ROM' file
/dev/hda9: No 'Mac OS ROM' file found
Searching images/moldisk.im for a 'Mac OS ROM' file
images/moldisk.im: No 'Mac OS ROM' file found
--- No bootable disk found ---
No newworld ROM was found
cleaning up...
Terminating threads...
DONE
I would much appreciate some assistance. Thank You, Ian
------=_NextPart_000_0012_01C2A045.E7AE90C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1126" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I have a PowerBook G4 version 11.3 that =
has the=20
3.3.6f5 (newworld) rom within it. I have YDL 2.3. I removed the default =
mol that=20
comes with YDL 2.3 (Everything Install) and have installed the 0.9.65 =
version of=20
mol. I can boot Mac OS 9.2.2 from a bootup disc without a =
hitch, but=20
when it comes to OSX it is a different story. I performed the updates =
'apt-get=20
update/upgrade' . I have edited the molrc.osx script,=20
however, any changes made are ignored at boot up (startmol, =
etc). The=20
following is the message I get after doing a 'startmol': </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2># startmol=20
--list<BR>--------------------------------------------------------------<=
BR> =20
Running kernel: =20
2.4.19-4a<BR>------------------------------------------------------------=
--<BR> =20
Available modules:<BR> =20
2.4.19-4a &nbs=
p; =20
in=20
/usr/lib/mol/0.9.65<BR>--------------------------------------------------=
------------</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><U><FONT size=3D4>VIEW=20
MOLRC.OSX:</FONT></U></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><STRONG><U><FONT=20
size=3D4></FONT></U></STRONG></FONT> </DIV><FONT face=3DArial =
size=3D2><FONT=20
size=3D4>
<DIV><BR><FONT =
size=3D2>include =20
${etc}/molrc.video # video=20
configuration<BR>include =
${etc}/molrc.input # mouse and=20
keyboard<BR>include =20
${etc}/molrc.net #=20
networking</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><BR><FONT=20
size=3D2>#---------------------------------------------------------------=
---------------<BR>#=20
Misc=20
Settings<BR>#------------------------------------------------------------=
------------------</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT=20
size=3D2>ram_size: &=
nbsp; =20
96<BR>disable_altivec: =
no</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><BR><FONT=20
size=3D2>#---------------------------------------------------------------=
---------------<BR>#=20
OS X=20
Volumes<BR>#-------------------------------------------------------------=
-----------------<BR>#<BR># =20
Volumes to be mounted in MacOS X are specified through=20
the<BR># blkdev=20
keyword:<BR>#<BR># &=
nbsp; =20
blkdev: =20
<device> =
[flags]<BR>#<BR># =20
Note that <device> should be a _single_ partition (e.g.=20
/dev/hda7).<BR>#<BR># IMPORTANT: IF =
A=20
COMPLETE DISK IS SPECIFIED instead of just a=20
single<BR># partition, then MOL =
might fail=20
to guard against the case where a=20
particular<BR># partition is mounted =
multiple times by different MOL=20
sessions.<BR># ALWAYS SPECIFY THE =
PARTION.=20
This issue will be addressed=20
eventually.<BR># Moreover, if an =
entire disk=20
is specified, then MacOS X will =
have<BR># =20
access to _all_ partitions on that disk. This is clearly=20
undesirable.<BR>#<BR># The following =
flags=20
are=20
supported<BR>#<BR># =
=20
-rw/-ro read-write / =
read-only=20
[default]<BR>#  =
; =20
-force force usage =
of=20
device (be=20
careful!)<BR>#  =
; =20
-boot boot =
from this=20
disk.<BR>#<BR># For now, the OS X =
boot disk=20
must be specified through the =
usage<BR># of=20
the -boot flag. E.g.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT =
size=3D2>blkdev: =20
/dev/cdrom -cd -boot -force</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><BR><FONT=20
size=3D2>#blkdev: &n=
bsp; =20
/dev/hda10 -rw</FONT><BR></FONT></DIV>
<DIV><BR></DIV></FONT>
<DIV><FONT face=3DArial size=3D4><STRONG><U>WITH=20
'STARTMOL'</U></STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2> </DIV></FONT>
<DIV><FONT face=3DArial size=3D2># startmol<BR>Mac-on-Linux 0.9.65 =
Copyright (C)=20
1997-2002 Samuel Rydh<BR>Config dir: /etc/mol<BR>Data dir:=20
/usr/share/mol/0.9.65<BR>Session 0. Lockfile: =
/var/lock/mol-0<BR>Debugger nub=20
disabled<BR>The session save/restore feature is disabled<BR>OF device =
tree:=20
oftrees/oftree.nw<BR>Timebase frequency: 24.96 MHz<BR>48MB RAM mapped at =
0x40000000<BR>Running in PowerPC G4 mode<BR>Using Linux =
keycodes<BR>Using=20
nvram-image '/var/lib/mol/nvram.nw'<BR>Could not open=20
'/var/lib/mol/x11.kbd'<BR>Video module 'xvideo' installed.<BR>Running on =
VT=20
8.<BR>Could not open '/var/lib/mol/console.kbd'<BR>Using usb mouse on=20
/dev/input/mice<BR>Cache enabled for console-video<BR>Video module=20
'console_video' installed.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>MODE: 640* 480, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 800* 600, depth 8,15 { 0.0 } Hz<BR>MODE: =
1024*=20
768, depth 8,15 { 0.0 } Hz<BR>MODE: 1152* 768, depth=20
8,15,32 { 54.7 } Hz<BR>MODE: 1152* 864, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 1280*1024, depth 8,15 { 0.0 } Hz<BR>MODE: =
1600*1200,=20
depth 8,15 { 0.0 } Hz</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Starting in video mode 1152*768, depth =
15, 54.7=20
Hz [offs:0, rb:2304]<BR>Ethernet Interface (port 1) =
'sheep-<eth0>' @=20
FE:FD:DE:AD:BE:EF<BR>DHCP nameserver exported: =
208.158.239.99<BR>Ethernet=20
Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE<BR>Using =
/dev/dsp for=20
sound output</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>HFS images/moldisk.i=20
MOL &nbs=
p; =20
<read-only> 0 MB<BR>HFS =20
/dev/hda9 =20
bootstrap =20
<read-write> 10 MB<BR>----> /dev/hda9 might be a =
boot-strap=20
partition.<BR>HFS+ /dev/hda10 =20
OSX &nbs=
p; =20
<read-write> 9537 MB<BR>No volumes found in '/dev/hdb'<BR>No =
volumes found=20
in '/dev/sda'<BR>No volumes found in '/dev/sdb'</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching /dev/hda10 for a 'Mac OS ROM' =
file<BR>/dev/hda10: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching /dev/hda9 for a 'Mac OS ROM'=20
file<BR>/dev/hda9: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching images/moldisk.im for a 'Mac =
OS ROM'=20
file<BR>images/moldisk.im: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>--- No bootable disk found ---<BR>No =
newworld ROM=20
was found<BR>cleaning up...<BR>Terminating =
threads...<BR>DONE</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D4><U><STRONG>WITH 'STARTMOL=20
--OSX':</STRONG></U></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2># startmol --osx<BR>Mac-on-Linux 0.9.65 =
Copyright=20
(C) 1997-2002 Samuel Rydh<BR>Starting MOL session 5<BR>Config dir:=20
/etc/mol<BR>Data dir: /usr/share/mol/0.9.65<BR>Session 5. Lockfile:=20
/var/lock/mol-5<BR>Debugger nub disabled<BR>The session save/restore =
feature is=20
disabled<BR>OF device tree: oftrees/oftree.x<BR>Timebase frequency: =
24.96=20
MHz<BR>96MB RAM mapped at 0x40000000<BR>Running in PowerPC G4 =
mode<BR>Using=20
Linux keycodes<BR>pci.c: Doesn't look lika a PCI device<BR>heathrow: =
Couldn't=20
get pci device number<BR>MOL PIC found<BR>No nvram found in device =
tree<BR>Using=20
nvram-image '/var/lib/mol/nvram.x'<BR>FIXME: IRQ assignement and device=20
identification<BR>Could not open '/var/lib/mol/x11.kbd'<BR>Video module =
'xvideo'=20
installed.<BR>Running on VT 8.<BR>Could not open=20
'/var/lib/mol/console.kbd'<BR>Using usb mouse on =
/dev/input/mice<BR>Cache=20
enabled for console-video<BR>Video module 'console_video'=20
installed.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>MODE: 640* 480, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 800* 600, depth 8,15 { 0.0 } Hz<BR>MODE: =
1024*=20
768, depth 8,15 { 0.0 } Hz<BR>MODE: 1152* 768, depth=20
8,15,32 { 54.7 } Hz<BR>MODE: 1152* 864, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 1280*1024, depth 8,15 { 0.0 } Hz<BR>MODE: =
1600*1200,=20
depth 8,15 { 0.0 } Hz</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Starting in video mode 1152*768, depth =
15, 54.7=20
Hz [offs:0, rb:2304]<BR>DHCP nameserver exported:=20
208.158.239.99<BR>Ethernet Interface 'tun-<tun5>' @=20
00:00:0D:EA:DB:EE</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Disk=20
/dev/cdrom &nb=
sp; &nbs=
p; =20
<read-only> 625 MB BOOT</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Boot device: =
<A>/mol-blk/disk@0:0</A><BR><*>=20
-------------------------------------------<BR><*> MacOS X boot =
loader=20
started<BR><*> Trying to load=20
<A>/mol-blk/disk@0:0,\mach_kernel.mol</A><BR><*> Opening partition =
[/mol-blk/disk@0:0]...<BR><*> Ext2InitPartition: 1<BR><*> =
Trying to=20
load <A>/mol-blk/disk@0:0,\mach_kernel</A><BR><*> Opening =
partition=20
[/mol-blk/disk@0:0]...<BR><*> Ext2InitPartition: 2<BR><*> =
-->=20
BootX failure: failed to load the mach kernel</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>cleaning up...<BR>Terminating=20
threads...<BR>DONE<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D4><U><STRONG>WITH 'STARTMOL=20
-1':</STRONG></U></FONT></DIV>
<DIV><STRONG><U><FONT face=3DArial =
size=3D4></FONT></U></STRONG> </DIV>
<DIV><STRONG><U><FONT face=3DArial =
size=3D4></FONT></U></STRONG> </DIV>
<DIV><FONT face=3DArial size=3D2># startmol -1<BR>Mac-on-Linux 0.9.65 =
Copyright (C)=20
1997-2002 Samuel Rydh<BR>Starting MOL session 1<BR>Config dir: =
/etc/mol<BR>Data=20
dir: /usr/share/mol/0.9.65<BR>Session 1. Lockfile: =
/var/lock/mol-1<BR>Debugger=20
nub disabled<BR>The session save/restore feature is disabled<BR>OF =
device tree:=20
oftrees/oftree.nw<BR>Timebase frequency: 24.96 MHz<BR>48MB RAM mapped at =
0x40000000<BR>Running in PowerPC G4 mode<BR>Using Linux =
keycodes<BR>Using=20
nvram-image '/var/lib/mol/nvram.nw'<BR>Could not open=20
'/var/lib/mol/x11.kbd'<BR>Video module 'xvideo' installed.<BR>Running on =
VT=20
8.<BR>Could not open '/var/lib/mol/console.kbd'<BR>Using usb mouse on=20
/dev/input/mice<BR>Cache enabled for console-video<BR>Video module=20
'console_video' installed.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>MODE: 640* 480, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 800* 600, depth 8,15 { 0.0 } Hz<BR>MODE: =
1024*=20
768, depth 8,15 { 0.0 } Hz<BR>MODE: 1152* 768, depth=20
8,15,32 { 54.7 } Hz<BR>MODE: 1152* 864, depth =
8,15 { 0.0=20
} Hz<BR>MODE: 1280*1024, depth 8,15 { 0.0 } Hz<BR>MODE: =
1600*1200,=20
depth 8,15 { 0.0 } Hz</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Starting in video mode 1152*768, depth =
15, 54.7=20
Hz [offs:0, rb:2304]<BR>Ethernet Interface (port 1) =
'sheep-<eth0>' @=20
FE:FD:DE:AD:BE:EF<BR>DHCP nameserver exported: =
208.158.239.99<BR>Ethernet=20
Interface (port 2) 'tun-<tun1>' @ 00:00:0D:EA:DB:EE<BR>Using =
/dev/dsp for=20
sound output</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>HFS images/moldisk.i=20
MOL &nbs=
p; =20
<read-only> 0 MB<BR>HFS+=20
/dev/cdrom =20
Mac_OS_X_CD =20
<read-only> 624 MB BOOT start: 968, len:=20
1278432<BR>HFS /dev/hda9 =
bootstrap =20
<read-write> 10 MB<BR>----> /dev/hda9 might be a =
boot-strap=20
partition.<BR>HFS+ /dev/hda10 =20
OSX &nbs=
p; =20
<read-write> 9537 MB<BR>No volumes found in '/dev/hdb'<BR>No =
volumes found=20
in '/dev/sda'<BR>No volumes found in '/dev/sdb'</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching /dev/cdrom for a 'Mac OS ROM' =
file<BR>/dev/cdrom: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching /dev/hda10 for a 'Mac OS ROM' =
file<BR>/dev/hda10: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching /dev/hda9 for a 'Mac OS ROM'=20
file<BR>/dev/hda9: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Searching images/moldisk.im for a 'Mac =
OS ROM'=20
file<BR>images/moldisk.im: No 'Mac OS ROM' file found</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>--- No bootable disk found ---<BR>No =
newworld ROM=20
was found<BR>cleaning up...<BR>Terminating =
threads...<BR>DONE<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I would much appreciate some =
assistance. Thank You,=20
Ian</DIV></FONT>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_0012_01C2A045.E7AE90C0--