Close - but no cigar!
Arch and Cath
mol-general@lists.maconlinux.org
Fri, 04 Oct 2002 11:42:40 -0400
> This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--Boundary_(ID_5JDJEIvJKEsJ+hR/HgPqCg)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
I am operating on a G3 Mac, MacOS9.1 and have just compiled and loaded
kernel 2.4-ben0.
I deinstalled mol and downloaded fresh rpms for mol & kmods src. Rebuilt
kmods, installed everything and updated the molrc's.
On startmol --loadonly I got kernel header messages but did startmol -a
--loadonly and they have gone away now even without -a.
Mol boots up normally, until it gets to where it is loading the desktop
(dateline on top, wristwatch) and then the mouse freezes. Following are
messages:
[root@bgp605467bgs mol]# startmol
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Session 0. Lockfile: /var/lock/mol-0
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 16.70 MHz
128MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Video module 'xvideo' installed.
Running on VT 8.
Using ps2 mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 640* 480, depth 8,15 { 0.0 } Hz
MODE: 800* 600, depth 8,15,32 { 72.1 } Hz
MODE: 1024* 768, depth 8,15 { 0.0 } Hz
MODE: 1152* 864, depth 8,15 { 0.0 } Hz
MODE: 1280*1024, depth 8,15 { 0.0 } Hz
MODE: 1600*1200, depth 8,15 { 0.0 } Hz
Starting in video mode 800*600, depth 32, 72.1 Hz [offs:0, rb:3200]
Autoswitching to console
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 68.39.224.6
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
Using /dev/dsp for sound output
HFS images/moldisk.i MOL <read-only> 0 MB
HFS /dev/sdb3 ATM HD-1 SYSTEM <read-write> 2047 MB BOOT
HFS /dev/sdb4 ATM HD-2 DATA-A <read-write> 2047 MB
HFS /dev/sdb5 ATM HD-4 SOFT <read-only> 2047 MB
HFS /dev/sdb6 ATM HD-3 DATA-B <read-only> 2047 MB
HFS+ /dev/sdb7 ATM HD-5 WIN95 <read-write> 490 MB
HFS /dev/sdd4 LINUX XFER <read-write> 95 MB
----> (disk_open) Opening /dev/cdrom: No medium found
Loading 'System Folder:Mac OS ROM' from /dev/sdb3
Mapping GC at 80800000
of_canon: /pci/@d/pci-ata@1/ata-4@0/disk@0 -- ''
of_open: node '/pci/pci-bridge/MacOnLinuxVideo:0' missing
************ WARNING, phandle == 0 ***********
extra vclaim, virt: 009B1000, size 2F000
**** of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args:
of_open: node '/pci/@d/pci-ata@1/ata-4@0/disk@0:5,\\:bear' missing
**** of_call_method: cmd 'read' ih: 00115ABC (4/2) Args: 00000200 00115ABC
*** nop_'close' [1,0] 00115ABC
Replacing old translation (EA 80816000, old-phys 0081E000)
Fixing timer calibration (0000C007)
********* of_quiesce *********
<*> kOpenCommand
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
WARNING: Ethernet packet dropped
X connection to :0.0 broken (explicit kill or server shutdown).
cleaning up...
Terminating threads...
DONE
Video is set to 800x600x72. tun shows port is eth0 which is right. What is
causing the "phandle == 0" message? Also "Args: of_open: seems to be a
problem.
Regards,
Arch
--Boundary_(ID_5JDJEIvJKEsJ+hR/HgPqCg)
Content-type: text/html; charset=US-ASCII
Content-transfer-encoding: 7BIT
<HTML>
<HEAD>
<TITLE>Close - but no cigar!</TITLE>
</HEAD>
<BODY>
I am operating on a G3 Mac, MacOS9.1 and have just compiled and loaded kernel 2.4-ben0.<BR>
<BR>
I deinstalled mol and downloaded fresh rpms for mol & kmods src. Rebuilt kmods, installed everything and updated the molrc's.<BR>
<BR>
On startmol --loadonly I got kernel header messages but did startmol -a --loadonly and they have gone away now even without -a. <BR>
<BR>
Mol boots up normally, until it gets to where it is loading the desktop (dateline on top, wristwatch) and then the mouse freezes. Following are messages:<BR>
<BR>
<FONT SIZE="2"><FONT FACE="Courier New">[root@bgp605467bgs mol]# startmol<BR>
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh<BR>
Config dir: /etc/mol<BR>
Data dir: /usr/share/mol/0.9.65<BR>
Session 0. Lockfile: /var/lock/mol-0<BR>
Debugger nub disabled<BR>
The session save/restore feature is disabled<BR>
OF device tree: oftrees/oftree.nw<BR>
Timebase frequency: 16.70 MHz<BR>
128MB RAM mapped at 0x40000000<BR>
Running in PowerPC G3 mode<BR>
Using Linux keycodes<BR>
Using nvram-image '/var/lib/mol/nvram.nw'<BR>
Video module 'xvideo' installed.<BR>
Running on VT 8.<BR>
Using ps2 mouse on /dev/input/mice<BR>
Cache enabled for console-video<BR>
Video module 'console_video' installed.<BR>
<BR>
MODE: 640* 480, depth 8,15 { 0.0 } Hz<BR>
MODE: 800* 600, depth 8,15,32 { 72.1 } Hz<BR>
MODE: 1024* 768, depth 8,15 { 0.0 } Hz<BR>
MODE: 1152* 864, depth 8,15 { 0.0 } Hz<BR>
MODE: 1280*1024, depth 8,15 { 0.0 } Hz<BR>
MODE: 1600*1200, depth 8,15 { 0.0 } Hz<BR>
<BR>
Starting in video mode 800*600, depth 32, 72.1 Hz [offs:0, rb:3200]<BR>
Autoswitching to console<BR>
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF<BR>
DHCP nameserver exported: 68.39.224.6<BR>
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE<BR>
Using /dev/dsp for sound output<BR>
<BR>
HFS images/moldisk.i MOL <read-only> 0 MB<BR>
HFS /dev/sdb3 ATM HD-1 SYSTEM <read-write> 2047 MB BOOT<BR>
HFS /dev/sdb4 ATM HD-2 DATA-A <read-write> 2047 MB<BR>
HFS /dev/sdb5 ATM HD-4 SOFT <read-only> 2047 MB<BR>
HFS /dev/sdb6 ATM HD-3 DATA-B <read-only> 2047 MB<BR>
HFS+ /dev/sdb7 ATM HD-5 WIN95 <read-write> 490 MB<BR>
HFS /dev/sdd4 LINUX XFER <read-write> 95 MB<BR>
----> (disk_open) Opening /dev/cdrom: No medium found<BR>
<BR>
Loading 'System Folder:Mac OS ROM' from /dev/sdb3<BR>
<BR>
Mapping GC at 80800000<BR>
of_canon: /pci/@d/pci-ata@1/ata-4@0/disk@0 -- ''<BR>
of_open: node '/pci/pci-bridge/MacOnLinuxVideo:0' missing<BR>
************ WARNING, phandle == 0 ***********<BR>
extra vclaim, virt: 009B1000, size 2F000<BR>
**** of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args:<BR>
of_open: node '/pci/@d/pci-ata@1/ata-4@0/disk@0:5,\\:bear' missing<BR>
**** of_call_method: cmd 'read' ih: 00115ABC (4/2) Args: 00000200 00115ABC<BR>
*** nop_'close' [1,0] 00115ABC<BR>
Replacing old translation (EA 80816000, old-phys 0081E000)<BR>
Fixing timer calibration (0000C007)<BR>
********* of_quiesce *********<BR>
<*> kOpenCommand<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
WARNING: Ethernet packet dropped<BR>
X connection to :0.0 broken (explicit kill or server shutdown).<BR>
cleaning up...<BR>
Terminating threads...<BR>
DONE<BR>
<BR>
</FONT></FONT><FONT FACE="Courier New">Video is set to 800x600x72. tun shows port is eth0 which is right. What is causing the "phandle == 0" message? Also "Args: of_open: seems to be a problem.<BR>
<BR>
Regards,<BR>
Arch<BR>
</FONT>
</BODY>
</HTML>
--Boundary_(ID_5JDJEIvJKEsJ+hR/HgPqCg)--