Close - but no cigar!

[Jamie Maynard]

OK well first off the last two bits you mentioned from the MOL log is stuff
I think you can safely ignore.  I get the same thing when I use MOL on my
iBook 500.

As for your problem with Mac OS 9 freezing under MOL have you tried the
basics like disabling all extensions and start-up items, if that doesn't
work trying disabling the network.

Oh well I remember.  Once you have loaded the modules they will be loaded in
to the kernel and won't load again.  The behaviour you have described is
normal MOL behaviour.

Hope this has been some help.

Jamie


On 4/10/02 5:42 pm, "Arch and Cath" <archandcath23@comcast.net> wrote:

> I am operating on a G3 Mac, MacOS9.1 and have just compiled and loaded kernel
> 2.4-ben0.
> 
> I deinstalled mol and downloaded fresh rpms for mol & kmods src.  Rebuilt
> kmods, installed everything and updated the molrc's.
> 
> On startmol --loadonly I got kernel header messages but did startmol -a
> --loadonly and they have gone away now even without -a.
> 
> Mol boots up normally, until it gets to where it is loading the desktop
> (dateline on top, wristwatch) and then the mouse freezes.   Following are
> messages:
> 
> [root@bgp605467bgs mol]# startmol
> Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
> Config dir: /etc/mol
> Data dir: /usr/share/mol/0.9.65
> Session 0. Lockfile: /var/lock/mol-0
> Debugger nub disabled
> The session save/restore feature is disabled
> OF device tree: oftrees/oftree.nw
> Timebase frequency: 16.70 MHz
> 128MB RAM mapped at 0x40000000
> Running in PowerPC G3 mode
> Using Linux keycodes
> Using nvram-image '/var/lib/mol/nvram.nw'
> Video module 'xvideo' installed.
> Running on VT 8.
> Using ps2 mouse on /dev/input/mice
> Cache enabled for console-video
> Video module 'console_video' installed.
> 
> MODE:  640* 480, depth 8,15   { 0.0 } Hz
> MODE:  800* 600, depth 8,15,32   { 72.1 } Hz
> MODE: 1024* 768, depth 8,15   { 0.0 } Hz
> MODE: 1152* 864, depth 8,15   { 0.0 } Hz
> MODE: 1280*1024, depth 8,15   { 0.0 } Hz
> MODE: 1600*1200, depth 8,15   { 0.0 } Hz
> 
> Starting in video mode 800*600, depth 32, 72.1 Hz  [offs:0, rb:3200]
> Autoswitching to console
> Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
> DHCP nameserver exported: 68.39.224.6
> Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
> Using /dev/dsp for sound output
> 
> HFS  images/moldisk.i MOL                <read-only>     0 MB
> HFS  /dev/sdb3        ATM HD-1 SYSTEM    <read-write> 2047 MB BOOT
> HFS  /dev/sdb4        ATM HD-2 DATA-A    <read-write> 2047 MB
> HFS  /dev/sdb5        ATM HD-4 SOFT      <read-only>  2047 MB
> HFS  /dev/sdb6        ATM HD-3 DATA-B    <read-only>  2047 MB
> HFS+ /dev/sdb7        ATM HD-5 WIN95     <read-write>  490 MB
> HFS  /dev/sdd4        LINUX XFER         <read-write>   95 MB
> ----> (disk_open) Opening /dev/cdrom: No medium found
> 
> Loading 'System Folder:Mac OS ROM' from /dev/sdb3
> 
> Mapping GC at 80800000
> of_canon: /pci/@d/pci-ata@1/ata-4@0/disk@0 -- ''
> of_open: node '/pci/pci-bridge/MacOnLinuxVideo:0' missing
> ************ WARNING, phandle == 0 ***********
> extra vclaim, virt: 009B1000, size 2F000
> **** of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args:
> of_open: node '/pci/@d/pci-ata@1/ata-4@0/disk@0:5,\\:bear' missing
> **** of_call_method: cmd 'read' ih: 00115ABC (4/2) Args:  00000200 00115ABC
> *** nop_'close' [1,0]   00115ABC
> Replacing old translation (EA 80816000, old-phys 0081E000)
> Fixing timer calibration (0000C007)
> ********* of_quiesce *********
> <*> kOpenCommand
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> WARNING: Ethernet packet dropped
> X connection to :0.0 broken (explicit kill or server shutdown).
> cleaning up...
> Terminating threads...
> DONE
> 
> Video is set to 800x600x72.  tun shows port is eth0 which is right.  What is
> causing the "phandle == 0" message?  Also "Args: of_open: seems to be a
> problem.
> 
> Regards,
> Arch
>