No HFS[+] filesystem found

Isaac Ordonez mol-general@lists.maconlinux.org
12 Sep 2002 10:39:05 -0400


hello,

I set up firwire support correctly.  I set up MOL as the manual says
to.  Now When I try and boot off my drive it gives me errors.  First it
recognises sda9 as a HFS+ partition but then it tells me it's not.  Has
anyone seen anything like this?

Error messages as follows:


Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Loading Mac-on-Linux kernel module:
   /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/mol.o
Warning: loading /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/mol.o will
taint the kernel: forced load
Loading SheepNet kernel module:
   /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/sheep.o
Warning: loading /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/sheep.o
will taint the kernel: forced load
Loading tun driver kernel module:
   /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/tun.o
Warning: loading /usr/local/lib/mol/0.9.65/modules/2.4.19-4a/tun.o will
taint the kernel: forced load
Session 0. Lockfile: /var/lock/mol-0
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 16.64 MHz
256MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
xvideo: X11 video depth 565
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15,32   { 60.0, 70.0, 75.0 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
---> DHCP server not installed
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
Using EsoundD daemon for sound output

HFS  images/moldisk.i MOL                <read-only>     0 MB 
HFS+ /dev/sda9        Firewire HD        <read-write> 57258 MB BOOT
----> (disk_open) Opening /dev/cdrom: No medium found

/dev/sda9: No HFS[+] filesystem found
Searching images/moldisk.im for a 'Mac OS ROM' file
images/moldisk.im: No 'Mac OS ROM' file found

--- No bootable disk found ---
No newworld ROM was found
cleaning up...
---> DHCP server not installed
Terminating threads...
DONE



Anyone have any Ideas?

Isaac Ordonez