modeline for fullscreen mol with new tibook

[christophe barbé]

On Tue, Sep 24, 2002 at 10:37:38AM +0200, Vincent Beffara wrote:
> > This modeline doesn't work for me.
> > I have not had time to test it more but it start to load macosx (the
> > part with the mol logo) and then the screen become black. Switching back
> > to X I see that mol is back in 800x600 without any nessage on the shell.
> 
> OK let's see if I remember all I did do make it work :
> 
> * Have the latest BenH kernel. Compile it with radeonfb support. (Don't
>   forget TUN and stuff, yadayadayada.)

I have done a rsync less than one week ago.
radeonfb is enabled by default.

> * I have the official debian package (in "unstable") for mol, ie version
>   number 0.9.65.

I have the one from the url advertised by the mol web site (0.9.65 too).
I suspect they are the same.

> * Video configuration : I was quite brutal and my molrc.video contains :
> 
> resolution:             1280/864/60     # width/height/Hz
> depth:                  32
> enable_xvideo:          no
> enable_console_video:   yes
> start_on_console:       yes             # switch to console initially
> autoswitch_console:     yes             # allow automatic switching
> 
>   (plus comments and stuff). This, plus I only kept the correct
>   resoltution + depth in molvconfig.

As I do. I have try with your modline and the one fbset give me on my
computer :

mode "1280x854-60"
    # D: 79.815 MHz, H: 51.963 kHz, V: 60.003 Hz
    geometry 1280 854 1280 854 8
    timings 12529 128 16 8 1 112 3
    accel true
    rgba 6/0,6/0,6/0,0/0
endmode


> And it _does_ work ... (Well except for sound but this is not related.)

It doesn't work. The console becomes black when the line "+ MOLVideo_Open" appears.

I put below the output :

~$ startmol --osx
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 5
Config dir: /etc/mol
Data dir: /usr/share/mol
Loading Mac-on-Linux kernel module:
   /lib/modules/2.4.20-pre7-ben0/misc/mol.o
Session 5. Lockfile: /var/lock/mol-5
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 33.33 MHz
96MB RAM mapped at 0x40000000
Running in PowerPC G4 mode
Could not open /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
Using Linux keycodes
pci.c: Doesn't look lika a PCI device
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/lib/mol/nvram.x'
FIXME: IRQ assignement and device identification 
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,32   { 0.0 } Hz
MODE:  800* 600, depth 8,32   { 0.0 } Hz
MODE: 1024* 768, depth 8,32   { 0.0 } Hz
MODE: 1280* 854, depth 8,15,32   { 60.0, 60.0 } Hz
MODE: 1152* 864, depth 8,32   { 0.0 } Hz
MODE: 1280*1024, depth 8,32   { 0.0 } Hz
MODE: 1600*1200, depth 8,32   { 0.0 } Hz

Starting in video mode 1280*854, depth 32, 60.0 Hz  [offs:0, rb:5120]

Disk /dev/hda5                           <read-write> 7111 MB BOOT

Boot device: /mol-blk/disk@0:0
<*> -------------------------------------------
<*> MacOS X boot loader started
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel.mol
<*> Opening partition [/mol-blk/disk@0:0]...
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel
<*> mach kernel read (3678188 bytes)
<*> mol owned memory at 0045D000 (1000)
<*> mregs mapped @ 0045e000 (2000)
<*> MacOS X mkext driver archive read (106988 bytes)
<*> DriversPackage-462000
<*> Command line: ''
<*> Framebuffer at 81000000 (1280x854)
<*> Jumping to kernel entrypoint...
<*> -------------------------------------------
Read from unimplemented SPR #1014
Read from unimplemented SPR #1015
<*> MOL acceleration for 10.1 (and later)
<*> MOL acceleration for 10.2 (and later)
<*> MolBlockDriver::starting
<*> MolEnet::start
Uninitialized osip vector 68
Uninitialized osip vector 70
Uninitialized osip vector 71
Uninitialized osip vector 71
Uninitialized osip vector 71
Uninitialized osip vector 71
Uninitialized osip vector 70
Uninitialized osip vector 73
<*> MolEnet: setPowerState 1
+ MOLVideo_Open
cleaning up...
Terminating threads...
DONE


> 
> HTH,
> 
> 	/V
> -- 
> Vincent Beffara
> DMA - ENS, 45 rue d'Ulm
> 75230 Paris cedex 05
> Tel: 01 44 32 20 67
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general