mol-install has no effect: no sound no conection

[erik]

Hello,

I'm not sure that this e-mail appears as an answer to the answer I got 
on my question. This is the output of startmol --osx. After that sound 
and networking is not available. Running mol-install has no effect and 
the icon appears on the screen.

With friendly regards

Erik de Wild

running startmol --osx results in the output below


[erik@ibook600 erik]$ startmol --osx
Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 1
Running in PowerPC G3 mode, 96 MB RAM
Timebase: 24.96 MHz, Bus: 99.84 MHz, Clock: 600 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Video driver(s): [xvideo]

      640* 480, depth 8,32   { 0.0 } Hz
      800* 600, depth 8,32   { 0.0 } Hz
     1024* 768, depth 8,32   { 0.0 } Hz
     1152* 864, depth 8,32   { 0.0 } Hz
     1280*1024, depth 8,32   { 0.0 } Hz
     1600*1200, depth 8,32   { 0.0 } Hz

DHCP nameserver exported: 192.168.1.1
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE

     CD   /dev/cdrom       CD-ROM         <read-only>   ------
     HFS+ /dev/hda9        max os X1      <rw> 9280 MB
----> /dev/hda11 might be a boot-strap partition.
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'


 >> ==================================================
 >> MacOS X Boot Loader 1.1.18
 >> Candidate boot volume: /mol-blk@0/disk@0:0
 >> /mol-blk@0/disk@0:0,\mach_kernel (3678188 bytes)
 >> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
 >> ==================================================

<*> MOL acceleration for 10.1 (and later)
<*> MOL acceleration for 10.2 (and later)
<*> Block Driver v1.1