MOL not booting OS X on RS/6000 7043-150p -- pointers?

[Craig A. Huegen]

Hi,

Compiled MOL off an rsync tree this morning and attempted to boot OS X.
I'm having no luck...

The X window stays at the yellow screen with the MOL icon (cute icon, btw).

If I try booting OS X with the default config, it states an unknown CPU
ID and tries to use G3 mode.  In that case, I get the "you must restart your
computer" error.  So, I added "processor: 604" to the molrc file.

Note that I did not add any other block devices because I want to see
if the CD will boot first.

Any pointers?

Here's the boot log:

---
recluse mol # startmol --osx --cdboot
Mac-on-Linux 0.9.68 Copyright (C) 1997-2002 Samuel Rydh
Starting MOL session 1
Config dir: /etc/mol
Data dir: /usr/local/share/mol/0.9.68
Session 1. Lockfile: /var/lock/mol-1
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 20.78 MHz
96MB RAM mapped at 0x40000000
Unknown processor id (0009)
Running in PowerPC 604 mode
Timebase: 20.78 MHz, Bus: 83.12 MHz, Clock: 374 MHz
heathrow: Couldn't get pci device number
MOL PIC found
Using usb mouse on /dev/input/mice
No nvram found in device tree
Using nvram-image '/var/local/mol/nvram.x'
Using backing store for X-window
Video module 'xvideo' installed.

MODE:  640* 480, depth 8,32   { 0.0 } Hz
MODE:  800* 600, depth 8,32   { 0.0 } Hz
MODE: 1024* 768, depth 8,32   { 0.0 } Hz
MODE: 1152* 864, depth 8,32   { 0.0 } Hz
MODE: 1280*1024, depth 8,32   { 0.0 } Hz
MODE: 1600*1200, depth 8,32   { 0.0 } Hz

Starting in video mode 640*480, depth 32, 0.0 Hz  [offs:0, rb:2560]
---> DHCP server not installed
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE



No volumes found in '/dev/hda'
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'
CD   /dev/cdrom       CD-ROM             <read-only>   ------ BOOT1


>> ==================================================
>> MacOS X Boot Loader 1.1.17
>> Candidate boot volume: /mol-blk@0/disk@0:9
>> Trying to load /mol-blk@0/disk@0:9,\mach_kernel.mol
>> Trying to load /mol-blk@0/disk@0:9,\mach_kernel
>> mach kernel read (3678188 bytes)
>> FileLoadDriversMKext /mol-blk@0/disk@0:9,\System\Library\
>> LoadDrivers: Loading from [/mol-blk@0/disk@0:9,\System\Library\Extensions.mkext]
>> Command line: ''
>> ==================================================

<*> MOL acceleration for 10.1 (and later)
<*> MOL acceleration for 10.2 (and later)
<*> Bad ifragsize
<*> MolAudio: 32768/1024 bytes
<*> MolEnet::start
<*> MolBlockDriver::starting
---

At this point it hangs.

/cah