Stops with "You must restart your computer" screen

Mark Suter mol-general@lists.maconlinux.org
Thu, 27 Mar 2003 23:01:47 +1000
Previous message: [PATCH] Fix radeon support for LCD scaling
Next message: Stops with "You must restart your computer" screen
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Folks,

I've installed the Debian packages for mol and have run into a
problem.  It starts, I see the pengiun hugging the apple but then
it stops on with the following message.

    You need to restart your computer.  Hold down the Power button
    for several seconds or press the Restart button.
    [ foreign language, french? ]
    [ foreign language, german ?]
    [ foreign language, mandarin ? ]
    FF:FF:FF:FF:FF:FF

I've got Mac OSX 10.2.4 installed and I can boot into it without
any noticable problems.  I ran molvconfig and it seemed to work
and the only file I've manuallly edited was /etc/mol/molrc.osx).
I've included that, along with some hopefully useful output below.

What am I doing wrong?

Thanks in advance,

-- Mark John Suter  | I know that you  believe  you understand
suter@humbug.org.au | what you think I said, but I am not sure
gpg key id 2C71D63D | you realise that what you  heard  is not
mobile 0411 262 316 | what I meant.        Robert J. McCloskey

----------------------------- begin -----------------------------

$ cat /proc/cpuinfo 
cpu             : 750FX
clock           : 700MHz
revision        : 2.2 (pvr 7000 0202)
bogomips        : 1389.36
machine         : PowerBook4,3
motherboard     : PowerBook4,3 MacRISC2 MacRISC Power Macintosh
detected as     : 257 (iBook 2 rev. 2)
pmac flags      : 0000000b
L2 cache        : 512K unified
memory          : 640MB
pmac-generation : NewWorld

$ sudo startmol --test
Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Unknown processor id (7000)
Running in PowerPC G3 mode, 48 MB RAM
Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 700 MHz
Failed to lookup IRQ
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Failed to register sound card



 ******************************
 *    Testing performance     *
 ******************************

 nop calibration     200.00 %
--------- USER MODE ----------
 li                  199.94 %
 lwz 3,0(0)          106.24 %
 lfd 3,0(0)          106.24 %
 stfd 3,0(0)         106.24 %
 b +4                 99.98 %
 mftb                 53.12 %
 mfctr                53.11 %
 mtlr                 53.11 %
 mflr                 53.11 %
 isync                25.75 %
 mfcr                 53.11 %
 mtcrf 1,3            53.12 %
--------- PRIVILEGED MODE ----
 mfmsr                 1.01 %
 mfmsr 3 . mtmsr 3     0.48 %
 tlbie 3               1.02 %
 tlbsync               1.01 %
 mfsr                  0.98 %
 mtsr                  0.78 %
 mfsrin                0.89 %
 mtsrin                0.72 %
 mtsrr1                0.98 %
 mfsrr1                1.00 %
 mfdec                 0.91 %
 mtdec                 0.82 %
 mtdbatu 0,3           0.17 %
 mtdbatl 0,3           0.17 %
 mtibatu 0,3           0.17 %
 mtibatl 0,3           0.17 %
 mfspr 3, HID0         0.96 %
 mtspr HID0,3          0.99 %
 mfspr 3, HID1         0.22 %
 mfspr 3, DBAR         0.22 %

 ******************************
 *    Self-test successful    *
 ******************************

cleaning up...
Terminating threads...
DONE

$ sudo startmol -X
Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 1
Unknown processor id (7000)
Running in PowerPC G3 mode, 96 MB RAM
Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 700 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 5.
Could not open '/var/lib/mol/console.kbd'
Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,32   { 0.0 } Hz
     800* 600, depth 8,32   { 0.0 } Hz
    1024* 768, depth 8,15,32   { 0.0 } Hz
    1152* 864, depth 8,32   { 0.0 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,32   { 0.0 } Hz


    CD   /dev/cdrom       CD-ROM         <read-only>   ------
    HFS+ /dev/hda13       Boot OSX       <rw>    8 MB BOOT
    Disk /dev/hda14                      <rw>    0 MB
    Disk /dev/hda15                      <rw> 8827 MB


>> ==================================================
>> MacOS X Boot Loader 1.1.18
>> Candidate boot volume: /mol-blk@0/disk@0:0
>> Loading UFS file: [\mach_kernel.mol] from 2.
>> Loading UFS file: [\mach_kernel] from 2.
>> /mol-blk@0/disk@0:0,\mach_kernel (3733508 bytes)
>> SyncRead: error
>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext is missing
>> Loading from /mol-blk@0/disk@0:0,\System\Library\
>> Loading UFS file: [\System\Library\Extensions\ACard62xxM.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\ACard671xSCSI.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\ACard68xxM.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\ATTOExpressPCI.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Adaptec78XXSCSI.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Adaptec290X-2930.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Adaptec29160x.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Adaptec39160.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Apple16X50Serial.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\Apple16X50Serial.kext\Contents\PlugIns\Apple16X50P.
>> Loading UFS file: [\System\Library\Extensions\AppleAirPort.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleAirPortFW.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleADBButtons.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleADBDisplay.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleADBKeyboard.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleADBMouse.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleBMacEthernet.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleGracklePCI.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleHeathrow.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleI2C.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleIntel8255x.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleKauaiATA.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleKeyLargo.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleKeyswitch.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleKiwiATA.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleKiwiRoot.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleLED.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleLM87.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleLynx.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMesh.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMPIC.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMacRISC2PE.kext\Contents\Info.plist] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMacRiscPCI.kext\Contents\Info.plist] from 2.
>> SyncRead: error
>> Loading UFS file: [\System\Library\Extensions\ACard62xxM.kext\Contents\MacOS\ACard62xxM] from 2.
>> Loading UFS file: [\System\Library\Extensions\ACard671xSCSI.kext\Contents\MacOS\ACard671xSCSI] f.
>> Loading UFS file: [\System\Library\Extensions\ACard68xxM.kext\Contents\MacOS\ACard68xxM] from 2.
>> Loading UFS file: [\System\Library\Extensions\ATTOExpressPCI.kext\Contents\MacOS\ATTOExpressPCI].
>> Loading UFS file: [\System\Library\Extensions\Adaptec78XXSCSI.kext\Contents\MacOS\Adaptec78XXSCS.
>> Loading UFS file: [\System\Library\Extensions\Adaptec290X-2930.kext\Contents\MacOS\Adaptec290X-2.
>> Loading UFS file: [\System\Library\Extensions\Adaptec29160x.kext\Contents\MacOS\Adaptec29160x] f.
>> Loading UFS file: [\System\Library\Extensions\Adaptec39160.kext\Contents\MacOS\Adaptec39160] fro.
>> Loading UFS file: [\System\Library\Extensions\AppleADBButtons.kext\Contents\MacOS\AppleADBButton.
>> Loading UFS file: [\System\Library\Extensions\AppleADBKeyboard.kext\Contents\MacOS\AppleADBKeybo.
>> Loading UFS file: [\System\Library\Extensions\AppleBMacEthernet.kext\Contents\MacOS\AppleBMacEth.
>> Loading UFS file: [\System\Library\Extensions\AppleGracklePCI.kext\Contents\MacOS\AppleGracklePC.
>> Loading UFS file: [\System\Library\Extensions\AppleHeathrow.kext\Contents\MacOS\AppleHeathrow] f.
>> Loading UFS file: [\System\Library\Extensions\AppleI2C.kext\Contents\MacOS\AppleI2C] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleIntel8255x.kext\Contents\MacOS\AppleIntel8255.
>> Loading UFS file: [\System\Library\Extensions\AppleKauaiATA.kext\Contents\MacOS\AppleKauaiATA] f.
>> Loading UFS file: [\System\Library\Extensions\AppleKeyLargo.kext\Contents\MacOS\AppleKeyLargo] f.
>> Loading UFS file: [\System\Library\Extensions\AppleKeyswitch.kext\Contents\MacOS\AppleKeyswitch].
>> Loading UFS file: [\System\Library\Extensions\AppleKiwiATA.kext\Contents\MacOS\AppleKiwiATA] fro.
>> Loading UFS file: [\System\Library\Extensions\AppleKiwiRoot.kext\Contents\MacOS\AppleKiwiRoot] f.
>> Loading UFS file: [\System\Library\Extensions\AppleLynx.kext\Contents\MacOS\AppleLynx] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMesh.kext\Contents\MacOS\AppleMesh] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMPIC.kext\Contents\MacOS\AppleMPIC] from 2.
>> Loading UFS file: [\System\Library\Extensions\AppleMacRISC2PE.kext\Contents\MacOS\AppleMacRISC2P.
>> Loading UFS file: [\System\Library\Extensions\AppleMacRiscPCI.kext\Contents\MacOS\AppleMacRiscPC.
>> ==================================================

X connection to :0.0 broken (explicit kill or server shutdown).
cleaning up...
Terminating threads...
DONE

$ grep '^[^#]' /etc/mol/molrc.osx 
include         ${etc}/molrc.video      # video configuration
include         ${etc}/molrc.input      # mouse and keyboard
include         ${etc}/molrc.net        # networking
ram_size:               96
disable_altivec:        no
blkdev:                 /dev/cdrom      -cd ${cdboot}
blkdev: /dev/hda13 -rw -force -boot
blkdev: /dev/hda14 -rw -force
blkdev: /dev/hda15 -rw -force

-----------------------------  end  -----------------------------
Previous message: [PATCH] Fix radeon support for LCD scaling
Next message: Stops with "You must restart your computer" screen
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]