MOL can't find os x boot volume

[garry collinson]

Here is the output from the terminal:

Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Running in PowerPC G3 mode, 128 MB RAM
Timebase: 16.64 MHz, Bus: 66.56 MHz, Clock: 499 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,15   { 0.0 } Hz
     800* 600, depth 8,15   { 0.0 } Hz
    1024* 768, depth 8,15,32   { 0.0 } Hz
    1152* 864, depth 8,15   { 0.0 } Hz
    1280*1024, depth 8,15   { 0.0 } Hz
    1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
---> The network interface 'eth0' is not configured!
Failed to initialize the sheep-<eth0> device
DHCP nameserver exported: 192.168.0.1
Ethernet Interface (port 1) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

    CD   /dev/cdrom       CD-ROM         <read-only>   ------
    HFS+ /dev/hda2        Macintosh HD   <rw> 14336 MB
----> /dev/hda3 might be a boot-strap partition.
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'


>> =============================================================
>> Mac-on-Linux OpenFirmware 0.9.12
>> os_seek error

>> --- No bootable disk was found! -----------------------------
>> If this is an oldworld machine, try booting from the MacOS
>> install CD and install MacOS from within MOL.
>> -------------------------------------------------------------
cleaning up...
Terminating threads...
DONE


Any ideas??

Colin