YDL 3.0 & "stock" MOL 0.9.68: OS X ok, OS 9 no boot

[Richard Theil]

I have installed YDL 3 to a PowerBook (Firewire) 400 MHz;
One partition ("Blackheart") contains 9.2.2 & X. MOL
will nicely boot X with ("startmol -X"), but the 9-boot
fails. I have changed the setup, so it explicitly has
the involved partitions set. They seem to get nicely
recognized. And then something odd with OF happens...

Ideas/Suggestions? (Log below, the "X-connection broken"
is after I close the window after a while of nothing
happening)

Rich

[rich@localhost rich]$ startmol
Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module mol loaded, with warnings
Loading SheepNet kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o will
taint the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module sheep loaded, with warnings
Loading tun driver kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module tun loaded, with warnings
Running in PowerPC G3 mode, 80 MB RAM
Timebase: 24.96 MHz, Bus: 99.86 MHz, Clock: 400 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,32   { 0.0 } Hz
     800* 600, depth 8,32   { 0.0 } Hz
    1024* 768, depth 8,15,32   { 60.0 } Hz
    1152* 864, depth 8,32   { 0.0 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,32   { 0.0 } Hz

Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 172.16.19.147
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

    CD   /dev/cdrom       CD-ROM         <read-only>   ------
    HFS+ /dev/hda9        Blackheart     <rw> 12288 MB BOOT


>> =============================================================
>> Mac-on-Linux OpenFirmware 0.9.12
>> ea_to_phys: no translation for 0000002a, using 1-1
>> ea_to_phys: no translation for fffffffc, using 1-1
>> ea_to_phys: no translation for 6000000c, using 1-1
Unmapped 'RAM-read-access', 6000000c
>> ea_to_phys: no translation for 0224008c, using 1-1
X connection to :0.0 broken (explicit kill or server shutdown).
cleaning up...
Terminating threads...
DONE
[rich@localhost rich]$