YDL 3.0 & "stock" MOL 0.9.68: OS X ok, OS 9 no boot

[Wesley Bear]

Yours appears to get stuck looking for the Mac OS ROM file.  Mine will look for
it and not get stuck, but it never finds it and tells me so.  I compiled 0.9.69
today only to have this problem again just like 68 had.  Here's my readout if
you want to see though, although it's nothing special.  Same as you, though, X
works just fine.  I think the Mac OS 9 and X on same partition problem was
actually noted by the developer, but I'm not really sure.  I just ended up
installing 9.2.2 to an image file and running it from there, although I really
would like to run the one already installed on my drive...

Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Unknown processor id (7000)
Running in PowerPC G3 mode, 160 MB RAM
Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 700 MHz
Using USB mouse on /dev/input/mice
Fullscreen video on VT 8.
Could not open '/var/local/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [console_video]

    1024* 768, depth 32   { 60.0 } Hz

No video mode match the default one.
Autoswitching to console
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF

    CD   /dev/cdrom       CD-ROM         <read-only>   ------
    HFS+ /dev/hda9        Wesley's iBook <rw> 23729 MB
----> /dev/hda10 might be a boot-strap partition.


>> =============================================================
>> Mac-on-Linux OpenFirmware 0.9.12

>> --- No bootable disk was found! -----------------------------
>> If this is an oldworld machine, try booting from the MacOS
>> install CD and install MacOS from within MOL.
>> -------------------------------------------------------------
cleaning up...
Terminating threads...
DONE


Quoting Richard Theil <Richard.Theil@web.de>:

> I have installed YDL 3 to a PowerBook (Firewire) 400 MHz;
> One partition ("Blackheart") contains 9.2.2 & X. MOL
> will nicely boot X with ("startmol -X"), but the 9-boot
> fails. I have changed the setup, so it explicitly has
> the involved partitions set. They seem to get nicely
> recognized. And then something odd with OF happens...
> 
> Ideas/Suggestions? (Log below, the "X-connection broken"
> is after I close the window after a while of nothing
> happening)
> 
> Rich
> 
> [rich@localhost rich]$ startmol
> Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
> Starting MOL session 0
> Loading Mac-on-Linux kernel module:
>    /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o
> Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o will taint
> the kernel: forced load
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module mol loaded, with warnings
> Loading SheepNet kernel module:
>    /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o
> Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o will
> taint the kernel: forced load
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module sheep loaded, with warnings
> Loading tun driver kernel module:
>    /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o
> Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o will taint
> the kernel: forced load
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module tun loaded, with warnings
> Running in PowerPC G3 mode, 80 MB RAM
> Timebase: 24.96 MHz, Bus: 99.86 MHz, Clock: 400 MHz
> Using USB mouse on /dev/input/mice
> Could not open '/var/lib/mol/x11.kbd'
> Fullscreen video on VT 8.
> Could not open '/var/lib/mol/console.kbd'
> Cache enabled for console-video
> Video driver(s): [xvideo] [console_video]
> 
>      640* 480, depth 8,32   { 0.0 } Hz
>      800* 600, depth 8,32   { 0.0 } Hz
>     1024* 768, depth 8,15,32   { 60.0 } Hz
>     1152* 864, depth 8,32   { 0.0 } Hz
>     1280*1024, depth 8,32   { 0.0 } Hz
>     1600*1200, depth 8,32   { 0.0 } Hz
> 
> Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
> DHCP nameserver exported: 172.16.19.147
> Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
> 
>     CD   /dev/cdrom       CD-ROM         <read-only>   ------
>     HFS+ /dev/hda9        Blackheart     <rw> 12288 MB BOOT
> 
> 
> >> =============================================================
> >> Mac-on-Linux OpenFirmware 0.9.12
> >> ea_to_phys: no translation for 0000002a, using 1-1
> >> ea_to_phys: no translation for fffffffc, using 1-1
> >> ea_to_phys: no translation for 6000000c, using 1-1
> Unmapped 'RAM-read-access', 6000000c
> >> ea_to_phys: no translation for 0224008c, using 1-1
> X connection to :0.0 broken (explicit kill or server shutdown).
> cleaning up...
> Terminating threads...
> DONE
> [rich@localhost rich]$
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general
> 


--