MOL 0.9.68 with YDL 3.0 on a 17" iMac iLamp using OSX 10.2.6

[Jeremy R. Gilby]

This worked!

Mac launches on Linux.

Now my next obstacle:
Mac only boots in what appears to be 800 x 600 with a depth of 8?

I've torqued with the video config file, but nothing changes.  It will
appear to start in the higher setting but reset to this "default"

Any ideas?

On Sat, 2003-05-10 at 16:47, Wesley Bear wrote:
> startmol -X
> 
> Worked for me.
> 
> Quoting "Jeremy R. Gilby" <jeremy@jeremygilby.com>:
> 
> > I'm wondering if this setup is even possible.
> > 
> > If anyone else has had success with this setup, I'd be happy to hear
> > some suggestions.
> > 
> > Here is my readout when trying to run MOL:
> > 
> > Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
> > Starting MOL session 0
> > Running in PowerPC G4 mode, 128 MB RAM
> > Timebase: 24.96 MHz, Bus: 99.84 MHz, Clock: 800 MHz
> > Using USB mouse on /dev/input/mice
> > Could not open '/var/lib/mol/x11.kbd'
> > Fullscreen video on VT 8.
> > Could not open '/var/lib/mol/console.kbd'
> > Cache enabled for console-video
> > Video driver(s): [xvideo] [console_video]
> > 
> >     640* 480, depth 8,15   { 0.0 } Hz
> >     800* 600, depth 8,15   { 0.0 } Hz
> >    1024* 768, depth 8,15   { 0.0 } Hz
> >    1152* 864, depth 8,15   { 0.0 } Hz
> >    1440* 900, depth 8   { 0.0 } Hz
> >    1280*1024, depth 8,15   { 0.0 } Hz
> >    1600*1200, depth 8,15   { 0.0 } Hz
> > 
> > No video mode match the default one.
> > Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
> > DHCP nameserver exported: 172.17.49.177
> > Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
> > 
> >    CD   /dev/cdrom       CD-ROM         <read-only>   ------
> >    HFS+ /dev/hda11       MAC OS X       <rw> 25942 MB BOOT
> > No volumes found in '/dev/hdb'
> > No volumes found in '/dev/sda'
> > No volumes found in '/dev/sdb'
> > 
> > =============================================================
> > Mac-on-Linux OpenFirmware 0.9.12
> > Searching MAC OS X for a 'Mac OS ROM' file
> > os_seek error
> > --- No bootable disk was found! -----------------------------
> > If this is an oldworld machine, try booting from the MacOS
> > install CD and install MacOS from within MOL.
> > -------------------------------------------------------------
> > cleaning up...
> > Terminating threads...
> > DONE
> > 
> > 
> > 
> > _______________________________________________
> > mol-general mailing list
> > mol-general@lists.maconlinux.org
> > http://lists.maconlinux.org/mailman/listinfo/mol-general
> > 
> 
> 
> -- 
> 
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general
> 
>