OpenBIOS troubles

[Nathanael Hasbrouck]

--Boundary-00=_7sxcAvIpkaVV6W2
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

I've just rsync'd and re-compiled (0.9.71-pre1), and I can't boot MOL=20
anymore. :^)  I think it's related to the new bios stuff - MOL switches to=
=20
vt2 and displays the yellow sreen for half a second, then dies and I see=20
the following in my shell:

>> OpenBIOS 1.0.RC1 [Mar 25 2004 17:44]
>> nvram error detected, zapping pram
>> ofmem_map: Bad parameters (81000010 81000010 000C1000)
>> Searching <NULL> for a 'Mac OS ROM' file
>> Boot Disk: /pci/pci-bridge/mol-blk/disk@1:0 [<NULL>]
>> Loading '<NULL>' from '<NULL>'
>> ----> =E5=CAp=E0=AD =DA=DA=DA=DA=DA=DA=DA=DA is not an ELF image
cleaning up...
=2D--> DHCP server not installed
Terminating threads...
DONE

=46ull /var/log/mol.0.log attached.  I do see a couple lines of text at the=
=20
yellow screen, something along the lines of=20

Welcome to OpenBIOS v1.05rc1
Built on March 25 2004=20

and then the time of the build.  It goes by too fast. :^)  I'm running=20
Debian Sid on an oldworld box (7600) trying to boot MacOS 8.6.  Self=20
compiled 2.4.24-ben1 kernel.  Is this an oldworld problem, or is it just=20
me?

NRH
=2D-=20
Ask not for whom the telephone bell tolls... if thou art in the bathtub, it=
=20
tolls for thee.

--Boundary-00=_7sxcAvIpkaVV6W2
Content-Type: text/x-log;
  charset="us-ascii";
  name="mol.0.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="mol.0.log"

Running in PowerPC 750 mode, 160 MB RAM
Timebase: 11.24 MHz, Bus: 44.99 MHz, Clock: 195 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered=20
=46ullscreen video on VT 2.
Cache enabled for console-video
Video driver(s): [console_video]=20

    1024* 768, depth 8,15   { 0.0 } Hz
    1024* 768, depth 8,15,32   { 0.0, 0.0, 75.0, 100.2 } Hz
    1152* 864, depth 8   { 0.0 } Hz
    1152* 864, depth 8,15,32   { 74.9, 79.7, 85.7 } Hz
    1280*1024, depth 8   { 0.0 } Hz
    1280*1024, depth 8,15   { 74.1, 74.9 } Hz

No video mode match the default one.
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF  [nodhcp]

Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

    ip/mask: 192.168.40.2/255.255.255.0  gw: 192.168.40.1
    broadcast: 192.168.40.255  nameserver: 192.168.40.1

Using ALSA mixer PCM 1 (mixerdevice 'default')
ALSA sound driver (device 'default')
ALSA: failed to setup mixer

    CD    /dev/cdrom       CD/DVD         <read-only>   ------=20
    HFS   /dev/sda4        Philosopher    <rw> 4598 MB=20
    HFS+  /dev/sdb4        Historian      <rw> 1041 MB=20
    HFS   /dev/sdc4        2nd Baseman    <rw> 2047 MB BOOT
    HFS   /dev/sdd4        Toshiba        <rw> 1171 MB=20

SCSI devices:

    /dev/sg1 SCSI-<1:0:3> CD/DVD MATSHITA CD-ROM CR-8005   2.0h
    SCSI /dev/cdrom  [handled as a generic SCSI device]
    /dev/sg5 SCSI-<2:0:3> CD/DVD NEC      CD-ROM DRIVE:502 2.0y


>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>> OpenBIOS 1.0.RC1 [Mar 25 2004 17:44]
>> nvram error detected, zapping pram
>> ofmem_map: Bad parameters (81000010 81000010 000C1000)
>> Searching <NULL> for a 'Mac OS ROM' file
>> Boot Disk: /pci/pci-bridge/mol-blk/disk@1:0 [<NULL>]
>> Loading '<NULL>' from '<NULL>'
>> ----> =01=E5=CAp=01=E0=AD =DA=DA=DA=DA=DA=DA=DA=DA is not an ELF image
cleaning up...
Terminating threads...

--Boundary-00=_7sxcAvIpkaVV6W2--