pb while loading tun module

[David C. Hacker, DVM]

Do you have ip tunneling already built into the kernel rather than a=20
module?  This might be the reason.

David C. Hacker, DVM
212 N 1st St #2
New Salem, ND 58563
(701) 843-8179
On May 13, 2004, at 4:03 PM, Benoit Chesneau wrote:

> I've some problem with mol while loading tun module. It tell met this
> module is already inserted, but when I do lsmod, I don't find it. Any=20=

> id
> why ?
>
> - Beno=EEt
>
> Output of startmol -X :
>
> Mac-on-Linux 0.9.70-gentoo -gentoo  [May 13 2004 22:58]
> Copyright (C) 1997-2004 Samuel Rydh
> Starting MOL session 1
> Loading Mac-on-Linux kernel module:
>    /usr/lib/mol/0.9.70/modules/2.6.6/mol.ko
> Loading tun driver kernel module:
>    /usr/lib/mol/0.9.70/modules/2.6.6/tun.ko
> insmod: error inserting '/usr/lib/mol/0.9.70/modules/2.6.6/tun.ko': -1
> File exists
> Running in PowerPC 7400 mode, 256 MB RAM
> Timebase: 33.33 MHz, Bus: 133.32 MHz, Clock: 1000 MHz
> Using USB mouse on /dev/input/mice
> OHCI USB controller registered
> Could not open '/var/lib/mol/x11.kbd'
> Video driver(s): [xvideo]
>
>      640* 480, depth 8,32   { 0.0 } Hz
>      800* 600, depth 8,32   { 0.0 } Hz
>     1024* 768, depth 8,32   { 0.0 } Hz
>     1152* 864, depth 8,32   { 0.0 } Hz
>     1280*1024, depth 8,32   { 0.0 } Hz
>     1600*1200, depth 8,32   { 0.0 } Hz
>
> Failed to open /dev/net/tun: No such device
> Failed to initialize the tun-<tun1> device
> ALSA sound driver (device 'default')
> MOL SCSI controller registered
>
>
>     <No SCSI Devices>
>
>     CD   /dev/cdrom       CD-ROM         <read-only>   ------
> ----> /dev/hda2 might be a boot-strap partition.
> ------> /dev/hda5 is linux-mounted with write privileges.
> Could not open '/dev/hda5' with read-write permissions
>     Unembedded HFS+ /dev/hda6                       <rw> 10638 MB
> No volumes found in '/dev/hdb'
> No volumes found in '/dev/sda'
> No volumes found in '/dev/sdb'
>
> USB device connect (1:2)
> USB device connect (2:5)
> USB device connect (2:4)
>
>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D
>>> MacOS X Boot Loader 0.9.70
>>> Candidate boot volume: /mol-blk@0/disk@0:0
>>> /mol-blk@0/disk@0:0,\mach_kernel (3832636 bytes)
>>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D
>
> <*> MOL acceleration for 10.3
> <*> Block Driver v1.1
> USBDEVFS_RESET: Connection timed out
> CLEARHALT: Broken pipe
> CLEARHALT: Broken pipe
> ioctl: CDROM_DRIVE_STATUS: Invalid argument
> <*> MolAudio 1.2
> Mounting MOL driver disk
> + Video Driver v1.12
>
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general
>