pb while loading tun module

[Benoit Chesneau]

The problem was that the kernel (2.6.6), even if I have tun compiled as
module, load the module. So the solution was to compile tun in the
kernel. Everything is ok for now thought sometimes, I have no internet
connectivity . But it is ok now.

Thx for your help anyway :)

Benoit

On Fri, 2004-05-14 at 00:34, David C. Hacker, DVM wrote:
> Do you have ip tunneling already built into the kernel rather than a=20
> module?  This might be the reason.
>=20
> David C. Hacker, DVM
> 212 N 1st St #2
> New Salem, ND 58563
> (701) 843-8179
> On May 13, 2004, at 4:03 PM, Benoit Chesneau wrote:
>=20
> > I've some problem with mol while loading tun module. It tell met this
> > module is already inserted, but when I do lsmod, I don't find it. Any=20
> > id
> > why ?
> >
> > - Beno=EEt
> >
> > Output of startmol -X :
> >
> > Mac-on-Linux 0.9.70-gentoo -gentoo  [May 13 2004 22:58]
> > Copyright (C) 1997-2004 Samuel Rydh
> > Starting MOL session 1
> > Loading Mac-on-Linux kernel module:
> >    /usr/lib/mol/0.9.70/modules/2.6.6/mol.ko
> > Loading tun driver kernel module:
> >    /usr/lib/mol/0.9.70/modules/2.6.6/tun.ko
> > insmod: error inserting '/usr/lib/mol/0.9.70/modules/2.6.6/tun.ko': -1
> > File exists
> > Running in PowerPC 7400 mode, 256 MB RAM
> > Timebase: 33.33 MHz, Bus: 133.32 MHz, Clock: 1000 MHz
> > Using USB mouse on /dev/input/mice
> > OHCI USB controller registered
> > Could not open '/var/lib/mol/x11.kbd'
> > Video driver(s): [xvideo]
> >
> >      640* 480, depth 8,32   { 0.0 } Hz
> >      800* 600, depth 8,32   { 0.0 } Hz
> >     1024* 768, depth 8,32   { 0.0 } Hz
> >     1152* 864, depth 8,32   { 0.0 } Hz
> >     1280*1024, depth 8,32   { 0.0 } Hz
> >     1600*1200, depth 8,32   { 0.0 } Hz
> >
> > Failed to open /dev/net/tun: No such device
> > Failed to initialize the tun-<tun1> device
> > ALSA sound driver (device 'default')
> > MOL SCSI controller registered
> >
> >
> >     <No SCSI Devices>
> >
> >     CD   /dev/cdrom       CD-ROM         <read-only>   ------
> > ----> /dev/hda2 might be a boot-strap partition.
> > ------> /dev/hda5 is linux-mounted with write privileges.
> > Could not open '/dev/hda5' with read-write permissions
> >     Unembedded HFS+ /dev/hda6                       <rw> 10638 MB
> > No volumes found in '/dev/hdb'
> > No volumes found in '/dev/sda'
> > No volumes found in '/dev/sdb'
> >
> > USB device connect (1:2)
> > USB device connect (2:5)
> > USB device connect (2:4)
> >
> >>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
> >>> MacOS X Boot Loader 0.9.70
> >>> Candidate boot volume: /mol-blk@0/disk@0:0
> >>> /mol-blk@0/disk@0:0,\mach_kernel (3832636 bytes)
> >>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
> >>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
> >
> > <*> MOL acceleration for 10.3
> > <*> Block Driver v1.1
> > USBDEVFS_RESET: Connection timed out
> > CLEARHALT: Broken pipe
> > CLEARHALT: Broken pipe
> > ioctl: CDROM_DRIVE_STATUS: Invalid argument
> > <*> MolAudio 1.2
> > Mounting MOL driver disk
> > + Video Driver v1.12
> >
> > _______________________________________________
> > mol-general mailing list
> > mol-general@lists.maconlinux.org
> > http://lists.maconlinux.org/mailman/listinfo/mol-general
> >
>=20
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general