MOL crash: Instruction Pointer not in ROM/RAM

[Francois Prowse]

ah, I'm also having this problem......when I start MOL I receive the
following output

Mac-on-Linux 0.9.70 [May 12 2004 22:26]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Running in PowerPC 7400 mode, 400 MB RAM
Timebase: 33.33 MHz, Bus: 133.33 MHz, Clock: 999 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not connect to X server
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Video driver(s): [console_video]

     800* 600, depth 8,15,32   { 0.0, 60.3, 74.9, 89.9 } Hz
    1024* 768, depth 8,15,32   { 60.0, 70.0 } Hz
    1024* 768, depth 8,32   { 74.8 } Hz
    1024* 768, depth 8,15,32   { 75.0 } Hz
    1152* 768, depth 8,15,32   { 54.7 } Hz
    1280* 854, depth 8,15,32   { 60.0 } Hz
    1152* 864, depth 8,15,32   { 59.9 } Hz
    1280*1024, depth 8,15,32   { 60.0, 60.0 } Hz
    1600*1200, depth 8,15,32   { 59.9 } Hz

No video mode match the default one.
Autoswitching to console
DHCP nameserver exported: 203.96.152.4
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
OSS sound driver
MOL SCSI controller registered


    <No SCSI Devices>

    Disk /dev/hda2                       <rw> 30008 MB BOOT


>> ==================================================
>> MacOS X Boot Loader 1.1.18
>> Candidate boot volume: /mol-blk@0/disk@0:3
>> /mol-blk@0/disk@0:3,\mach_kernel (3744576 bytes)
>> Old mkext timestamp (or safe-boot)
>> Loading from /mol-blk@0/disk@0:3,\System\Library\
Instruction Pointer not in ROM/RAM (nip FFF00800, nip_phys FFF00800)
cleaning up...
Terminating threads...
DONE

Any help appreciated

re

Francois




On Tue, 25 May 2004, CSR wrote:

> I am having the same error as described in
> http://lists.maconlinux.org/pipermail/mol-general/2003-February/001214.html
>
> I installed MOL on a G3 w/ Debian and it worked fine with the command
> startmol -X -a
>
> Once I had OS 10.2 running there was an install package for MOL drivers.  I
> installed these, shutdown MOL, and rebooted the machine.  Now I am receiving
> the Instruction Pointer error.  I booted directly into OS X and removed the
> MOL drivers that had been installed, but continue to have the problem.  I
> also removed and reinstalled the Debian MOL packages.  No joy.
>
> Has this problem been resolved?
>
> Charley
>
>
> _______________________________________________
> mol-general mailing list
> mol-general@lists.maconlinux.org
> http://lists.maconlinux.org/mailman/listinfo/mol-general
>