mol errors when starting

[Adam Done]

On Mon, 2004-11-01 at 19:15, Tommy Trussell wrote:
> On Mon, 01 Nov 2004 Adam Done <mlist at donestudios.com> said:
> > Has anyone got errors like this when starting?
> >
> >  #  startmol -X
> > Mac-on-Linux 0.9.70 [Sep 11 2004 22:43]
> > Copyright (C) 1997-2004 Samuel Rydh
> > Starting MOL session 1
> > Removing stale lockfile /var/lock/mol-1
> > Running in PowerPC 7400 mode, 250 MB RAM
> > Timebase: 24.90 MHz, Bus: 99.62 MHz, Clock: 800 MHz
> > Using USB mouse on /dev/input/mice
> > OHCI USB controller registered
> > Could not open '/var/lib/mol/x11.kbd'
> > ***** SIGNAL 11 [Segmentation fault] in thread main-thread *****
> 
> Did you have a look at /var/lib/mol/x11.kbd ?  It's a text file with keymap
> assignments. Try running the normal setup utilities again to create the files
> in that directory. You have to run these as root:
> 
>  startmol --keyconfig
>  molvconfig
> 
> Then you might get some more helpful diagnostic information by testing the
> installation:
> 
>  startmol --test


I ran:

# startmol --keyconfig

Removing stale lockfile /var/lock/mol-0
Running in PowerPC 7400 mode, 48 MB RAM
Timebase: 24.90 MHz, Bus: 99.62 MHz, Clock: 800 MHz
Failed to lookup IRQ
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
***** SIGNAL 11 [Segmentation fault] in thread main-thread *****
   si_signo = 11, si_errno 0, si_code 00000001, si_addr 0xfef74534
   Last RVEC: 0x0 (0), last OSI: 0, mac_nip FFF00100
   NIP 0x0fbc3688
***** Backtrace *****
   7fffef50: backtrace + 0x40
   7fffef80: signal_handler + 0x21c
   7fffefc0: 0x0fd47bd4
   7fffeff0: 0x7ffff348
   7ffff640: 0x0fd42d2c
   7ffff660: 0x0fbc20ec
   7ffff680: 0x0fef66bc
   7ffff6a0: 0x0fef667c
   7ffff6c0: 0x0fee0254
   7ffff6f0: 0x0fee05e8
   7ffff710: 0x0feed890
   7ffff8b0: 0x0feed79c
   7ffff8e0: create_x_picture + 0x3c4
   7ffffa20: x11_init + 0x3d4
   7ffffaa0: driver_mgr_init + 0x64
   7ffffad0: ioports_init + 0x50
   7ffffaf0: main + 0x1fc
   7ffffb20: 0x0fb651a0
   7ffffb60: 0x00000000
cleaning up...


and

# startmol --test
 #  startmol --test
Mac-on-Linux 0.9.70 [Sep 11 2004 22:43]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 0
Removing stale lockfile /var/lock/mol-0
Running in PowerPC 7400 mode, 48 MB RAM
Timebase: 24.90 MHz, Bus: 99.62 MHz, Clock: 800 MHz
Failed to lookup IRQ
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
***** SIGNAL 11 [Segmentation fault] in thread main-thread *****
   si_signo = 11, si_errno 0, si_code 00000001, si_addr 0xfef74534
   Last RVEC: 0x0 (0), last OSI: 0, mac_nip FFF00100
   NIP 0x0fbc3688
***** Backtrace *****
   7fffef50: backtrace + 0x40
   7fffef80: signal_handler + 0x21c
   7fffefc0: 0x0fd47bd4
   7fffeff0: 0x7ffff348
   7ffff640: 0x0fd42d2c
   7ffff660: 0x0fbc20ec
   7ffff680: 0x0fef66bc
   7ffff6a0: 0x0fef667c
   7ffff6c0: 0x0fee0254
   7ffff6f0: 0x0fee05e8
   7ffff710: 0x0feed890
   7ffff8b0: 0x0feed79c
   7ffff8e0: create_x_picture + 0x3c4
   7ffffa20: x11_init + 0x3d4
   7ffffaa0: driver_mgr_init + 0x64
   7ffffad0: ioports_init + 0x50
   7ffffaf0: main + 0x1fc
   7ffffb20: 0x0fb651a0
   7ffffb60: 0x00000000
cleaning up...



Those both give me the error output.  Over the years of using mol, I
have never seen this or experienced this at all.  It worked last night
but this afternoon after doing an apt-get upgrade in debian testing I
get these errors.  Even a clean install of mol resulted in the same
thing, so I gather it could be of one of the files I upgraded that
conflicts with mol.  I provided the list of updates so if anyone had an
issue like this that can be tied to one of the updates I  would know the
issue.  

The computer just sits there with the cleaning up and hangs till I stop
mol.  

Can it be related to alsa as to I am also having issues with xmms not
being able to play music from the net?  Xmms after filling ups the
buffer can not play anything then freezes?  So I don't know if there is
a connecton here :(

-adam